All Activity
-
Ddlochner replied to the thread : Beneteau 35S5 – Replacement Jib Sheets & Main Halyard.In general jib sheets are sized to 1.5x the boat length. ½" line works for my 36' Sabre. It is large enough to have a good hand and...
-
When I launched there was no water. If you followed the recommended instructions you should see no water. If you do see water increase... -
Rick D replied to the thread Double sided tape that can withstand the heat?.I use the grey 3M indoor-outdoor tape on just about everything on the boat and home. I did have one failure on a large framed painting...
-
Davidasailor26 replied to the thread Is AI a tool that can aide boaters?.Yes, the data sources are the key. I mentioned a few posts above that I created a Google Notebook with just my user manuals. I just... -
Davidasailor26 reacted to jssailem's post in the thread Is AI a tool that can aide boaters? with
Like.
Interesting outcome @jaysweet. Your info confirms an AI issue. Like the search engines before them, AI is only as good as the AI... -
rpwillia replied to the thread Holding tank and water tank under V berth sending units. -
jssailem replied to the thread Is AI a tool that can aide boaters?.Interesting outcome @jaysweet. Your info confirms an AI issue. Like the search engines before them, AI is only as good as the AI... -
-
Ddlochner replied to the thread Holding tank and water tank under V berth sending units.Yes, the puck attaches to the top of the tank with VHB tape, no sensor stripes. The unit connects to the NMEA 2000 for power and sends...
-
thinwater replied to the thread Double sided tape that can withstand the heat?.What specific product did you use? 3M VHB or a knock-off? 95F is nothing for 3M tapes. If the roof is un-cored, the temperature of the... -
-
rpwillia replied to the thread Holding tank and water tank under V berth sending units.With the Gobius C, is that hockey puck looking thing the only thing that attaches to the tank? No sensor stripe down the side? Does it...
-
I found a partial diagram and some written instructions that answer my question in the French version of the manual. Hopefully this... -
kloudie1 replied to the thread Double sided tape that can withstand the heat?.Probably going to have to use primer on the parts to be bonded. The real 3M tape is the best .. I don't know if that is what you used...
-
rpwillia reacted to kappykaplan's post in the thread What size head sails are 310 folks running? with Like.
I have two headsails: a 110 and a 150. I used to do a lot of solo with the 150 - way too much sail when the wind piped up. I am quite...
-
rpwillia reacted to Ward H's post in the thread What size head sails are 310 folks running? with Like.
This is the reason we just ordered a 100% jib to replace my 135% genoa. With our winds rarely below 10 and mostly 12 to 20 we opted...
-
I vibe coded a boat selection app based on Analytical Hierarchy Process. Took about an hour to create a functional, standalone web app...
