All Activity
-
jaysweet replied to the thread Raymarine C80 to Axiom9 chartplotter conversion.I swapped out a non-functioning C80 for an Axiom 9 in 2021 (Between chart plotters), after wasting way too much money sending the C80... -
-
BigEasy reacted to CrispyCringle's post in the thread Raymarine C80 to Axiom9 chartplotter conversion with
Like.
If your wind and water instruments already go through a STNG converter you should be good to go. I have the problem you have with the... -
Ccolemj replied to the thread Anyone use Yoga Mats for cockpit cushions?.Depending on your cockpit seat width, one of those could be enough for two seats. I do know where you can get closed cell foam (you can...
-
Stu Jackson reacted to thinwater's post in the thread Unconventional Deck Fuel Fill Installation and Bed-It Tape with Like.
You do not use bed-it (butyl) with fuel or gasoline. It will dissolve if there is a spill. The most fuel-resistant of marine sealants is... -
danstanford replied to the thread Sail condition.To illuminate how bad this can be, I have a Code 0 in a bag in 3 pieces which I cannot bring myself to throw away. I am not a hoarder... -
BigEasy replied to the thread Raymarine C80 to Axiom9 chartplotter conversion.Thanks, good to hear that you are pleased with your axiom plotter! I installed an evolution 100 wheel pilot a few years ago & use it...
-
Jeff Jellick replied to the thread Companion Way Doors vs. boards for Hunter 356.Hello, Do you have a recommendation for a Hunter 45 CC where our companion door is unable to lock -
What John has just detailed perfectly is 100% what you should see and not see. I just installed a new PSS system on my Hunter 340 last... -
I recently got back onto the Great Lakes with the 1980 hull 143, 37 Cherubini. Fortunately, over the years, this boat has had many... -
jaysweet replied to the thread Yanmar gaskets, o-rings, etc..I guess I'll probably pass on the specialized oil filter, but thanks.
-
jaysweet replied to the thread Yanmar gaskets, o-rings, etc..They have a very nicely laid out website: thanks for that. I'll tuck that link away for use later. I was sort of raised in Newport...
-
jaysweet replied to the thread Yanmar gaskets, o-rings, etc..Much thanks to Charles, who kindly mailed me his extra gaskets! This solves my immediate problem, and will give me something to do on...
-
thinwater replied to the thread Heaving to.Do NOT heave to with an overlapping jib unless you want to stretch the leach over the spreaders. This is not good for it. Folks do it... -
Ddlochner replied to the thread PYI PSS Dripless seal.If the engine alignment is not correct, it will spray water when running. Increasing compression on the bellows will not stop the spray.
-
Hayden Watson replied to the thread What bottom paint for PNW....The sluffing of ablatives is why I like my hard paint. I dive my own boat and I get very little of the blue cloud when I wipe off the...
