All Activity
-
Yes, I used Laborde Power Products many years ago. They used to be the Yanmar distributor for Southern region. Not sure what their... -
Hayden Watson replied to the thread What bottom paint for PNW....1.6 gal for 2 full coats -
jaysweet replied to the thread Yanmar gaskets, o-rings, etc..Thanks for all the replies. I also haven't had to buy many Yanmar-specific parts with this boat, because my 2GM20F has just worked... -
Terry Cox replied to the thread CAMPING FEES IN BC. BE AWARE!.No need to use mooring. I've anchored in here before. Good holding and plenty of room. -
shemandr replied to the thread Hunter 240 Rig Upgrades.I like the alterations #2 to 4! I don't completely understand #1. I guess it was necessary after the failure of the original setup... -
Hayden Watson replied to the thread What bottom paint for PNW....My C30 takes a bit more than 1.5 gallons. I save the leftover paint and use it first on the next time painting. It lasts almost...
-
Rick Webb replied to the thread Aluminum or stainless, and type, on mast support pole, Hunter 23.5?.If you have a 2 X 6 fender board you can stretch that across the seats for your helper to stand on and it is even easier for the person... -
I have a 2.3 - agree it's not the best, have replaced the carb twice in 8 years, cleaning just doesn't do it. Last carb change, I... -
Sounds like a trip to Port Townsend is in order.
-
Well, @kloudie1 your comment inspired me to check with another Claude to see what my Yanmar 3JH2e is based on. Claude's response: "The... -
BigEasy replied to the thread Yanmar gaskets, o-rings, etc..Yes, I used Laborde Power Products many years ago. They used to be the Yanmar distributor for Southern region. Not sure what their...
-
JamesG161 replied to the thread Volvo Sail Drive sudden rapid galvanic attack damage and management question.I just found a good reference on this issue. _______ ____ Jim... -
-
Don S/V ILLusion replied to the thread i have just purchased a 83 hunter 34 and first item to address is the smile doesn' seem to awful but could use advice from othe owners. seal and fair..You could make a fortune if you started a colonoscopy practice. -
Don S/V ILLusion reacted to Ralph Johnstone's post in the thread i have just purchased a 83 hunter 34 and first item to address is the smile doesn' seem to awful but could use advice from othe owners. seal and fair. with
Like.
Aw, c'mon. He didn't open up the joint BUT he was able to inspect the keel bolts with his X-ray vision glasses. I keep mine right... -
Ralph Johnstone replied to the thread i have just purchased a 83 hunter 34 and first item to address is the smile doesn' seem to awful but could use advice from othe owners. seal and fair..Aw, c'mon. He didn't open up the joint BUT he was able to inspect the keel bolts with his X-ray vision glasses. I keep mine right... -
