All Activity
-
kappykaplan replied to the thread Corroded Dezincified Hose Barb on Raw Water Intake Ball Valve.Here's the link (and it's @Maine Sail) ... -
DDean Strong replied to the thread Corroded Dezincified Hose Barb on Raw Water Intake Ball Valve.Been searching on @Main Sail but nothing comes up. Is this Main Sail on Sailboatowners.com or some other site?
-
Ralph Johnstone replied to the thread What bottom paint for PNW....Good idea starting with a clean slate. Can't believe the amount of labour that you put into your boat. Also like the term "hull... -
Don S/V ILLusion replied to the thread i have just purchased a 83 hunter 34 and first item to address is the smile doesn' seem to awful but could use advice from othe owners. seal and fair..That’s the best advice. -
Ralph Johnstone replied to the thread i have just purchased a 83 hunter 34 and first item to address is the smile doesn' seem to awful but could use advice from othe owners. seal and fair..I would suspect that checking the keel bolt torque MAY be looking for trouble if the bolts are badly corroded. Simply covering up this...
-
Is this $20/visit in addition to the mooring fee $12/night? If not then after 1 night the non-resident benefits over the resident. Or... -
Yes, open to debate! (Our previous boat was registered in Toronto, but we live in BC....) WA cost in C$ depends on exchange rate...
-
jssailem reacted to Don S/V ILLusion's post in the thread i have just purchased a 83 hunter 34 and first item to address is the smile doesn' seem to awful but could use advice from othe owners. seal and fair. with
Helpful.
To expand on the keel bolts “looked perfect”, this is a big red flag and is all the more reason to suspect problems. No keel bolts ever... -
Don S/V ILLusion replied to the thread i have just purchased a 83 hunter 34 and first item to address is the smile doesn' seem to awful but could use advice from othe owners. seal and fair..To expand on the keel bolts “looked perfect”, this is a big red flag and is all the more reason to suspect problems. No keel bolts ever...
-
Ccolemj replied to the thread Any hope for instrument display 'burn-in'?.That ST4000+ is at least 26yrs old, and was an existing product from a different company before Raymarine acquired that company. It was...
-
BigEasy replied to the thread Honda 2.3 HP. I give up..Try replacing the cord with Stihl’s Elastostart pull cord & handle. Many owners’ of Stihl‘s high compression chain saws report... -
BigEasy replied to the thread Corroded Dezincified Hose Barb on Raw Water Intake Ball Valve.You have fittings over 30 years old of unknown quality & condition. Time to replace all of them with quality bronze fittings. I order...
-
jssailem replied to the thread i have just purchased a 83 hunter 34 and first item to address is the smile doesn' seem to awful but could use advice from othe owners. seal and fair..The fact that the boat has been in fresh water is good. The corrosion process is slower in fresh water. We know that the boat is about...
-
Hello Below replied to the thread What bottom paint for PNW....I have used Micron CSC (now CSC CA) since the boat was new in 2012 and get anywhere from 2 - 4 years until it requires reapplication... -
kloudie1 replied to the thread i have just purchased a 83 hunter 34 and first item to address is the smile doesn' seem to awful but could use advice from othe owners. seal and fair..Yup.. Set her on the keel then torque the bolts then do a minor grind on the seams then fill with something like G-Flex with micro...
