All Activity
-
The transition from my Ranger with a back breaking hand anchor system to my Hunter 356 with a windlass was like being re-born into... -
The transition from my Ranger with a back breaking hand anchor system to my Hunter 356 with a windlass was like being re-born into... -
thinwater replied to the thread Anchor chain corroding after 2 years.Sure. The ground may (probably) is intermittent, so you will have to check at the marina, anchored, and underway, probably at least... -
shemandr replied to the thread New Owner // 1983 Hunter 27 // Running Rigging Questions.Most likely the speed sensor is a paddle wheel in a thru hull. Look in the bilge forward of the keel to one side or the other. Those... -
shemandr replied to the thread Catalina 27 Boat Trailer.Trailers without boats are as rare as hen's teeth. (Will might be able to tell me the derivation of that expression). We don't know...
-
shemandr replied to the thread New windlass for Papillon..The transition from my Ranger with a back breaking hand anchor system to my Hunter 356 with a windlass was like being re-born into...
-
shemandr replied to the thread Honda 2.3 HP. I give up..I had a 2hp Nisson and it was subject to poor starting and stalling. I was using the gasohol fuel - which is what was available then...
-
We just got back from our first cruise with the new windlass and I am in love! It did everything I wanted it to and the process of...
-
Hayden Watson replied to the thread New windlass for Papillon..We just got back from our first cruise with the new windlass and I am in love! It did everything I wanted it to and the process of...
-
Hayden Watson replied to the thread Honda 2.3 HP. I give up..I have the older water cooled 2-hp and had similar problems. It was all related to fuel delivery. There is a fine mesh filter in the...
-
AI have had many Honda products and swear by them. I still have my 1971 Honda MiniTrail in my shed and it still runs but.... The 2.3 HP...
-
Ddlochner replied to the thread Corroded Dezincified Hose Barb on Raw Water Intake Ball Valve.As @Ralph Johnstone mentioned there needs to be an electrical connection between the anode and the hose barb to complete the circuit...
-
Don S/V ILLusion replied to the thread Corroded Dezincified Hose Barb on Raw Water Intake Ball Valve.When I used to winterize the A/C on our Hunter, I would suck antifreeze through the hose attached to that thruhull which was the only... -
Ralph Johnstone replied to the thread Corroded Dezincified Hose Barb on Raw Water Intake Ball Valve.As per above, inferior metallurgy is the most likely cause of the early failure of the barbed fitting. Kind of hard to tell what the... -
jssailem reacted to Inter20sailor's post in the thread Use Raritan Joker valve in Jabsco? with
Like.
Thank you all for the intel. Ordered! Fair winds to all…..