All Activity
-
Definitely the better way to go and avoid an additional relay (the booster relay) if you can get anywhere near the wiring. I'm retired... -
quadrille38 replied to the thread What are these indicators?.On my 38 the gauge on the right with the switch - left position is fresh water, right is holding tank -
twodzusfittings replied to the thread Cabin top hand rail.@Richard19068 I do not varnish my hand rails. I just give it a coat of teak oil once in a while. If the cap nuts get a little stain on... -
Stu Jackson replied to the thread CAMPING FEES IN BC. BE AWARE!.Seems to have happened on both sides of the border. -
Manuals are a helpful tool for the new owner to discover everything on the boat. Here is a copy from our SBO archives...
-
Davidasailor26 reacted to colemj's post in the thread Galvanic Corrosion/zinc depletion question. with
Like.
50Hz vs 60Hz makes no difference. As stated, AC current has little impact on stray current corrosion. If the culprit does happen to... -
Davidasailor26 replied to the thread What are these indicators?.All the Wema holding tank gauges I can find online have the red and the toilet icon on the full side. All the water gauges have the red...
-
fred1diver replied to the thread Start button.I am looking on Amazon at the moment for the remote a member has mentioned, not 1.50$ but still interesting, now some are cheaper and... -
Rudy is D&R, this is literally a “Mom & Pop” operation, just Rudy and his Wife, Debbie (hence, D&R). Rudy really should have hired a few... -
kappykaplan replied to the thread What are these indicators?.Tks for the clarification. :beer: -
Ddlochner replied to the thread What are these indicators?.Not necessarily. Hunter may have used the same gauge for boats with a single holding tank and ones with 2 holding tanks. On the single...
-
fred1diver replied to the thread Furler Q’s.Ok, the furler is back in one piece, which is great, now what is not so great apparently are my measuring skills, I am 1 ½” a bit short...
-
Ddlochner replied to the thread Start button.I also rewired the solenoid wires with 10 ga and took the ignition power directly from the DC+ bus instead of the starter's DC+...
-
Ralph Johnstone replied to the thread Start button.Definitely the better way to go and avoid an additional relay (the booster relay) if you can get anywhere near the wiring. I'm retired... -
kappykaplan replied to the thread What are these indicators?.Two tanks read off that meter, determined by the position of the toggle - as @jssailem 's diagram shows. Do you have two black water...