All Activity
-
kloudie1 replied to the thread Jabsco Model 3600 diaphragm bilge pump. The pump operates, but it doesn't seem to generate enough suction.MAN! you should have seen the 30+ year old schmutz in the false bilge of my H-34.. Definitely had migrated there .. unlike the coco nuts... -
kloudie1 reacted to Ralph Johnstone's post in the thread Jabsco Model 3600 diaphragm bilge pump. The pump operates, but it doesn't seem to generate enough suction with
Ha.
Dang, another term I'll have to add to my nautical vocabulary :facepalm:. -
Ralph Johnstone replied to the thread Looking for plexiglass washboards for a Catalina 34.What's so funny :soapbox: ? There's no way we can fit a washing machine into our H-310 without permanently moving everything out onto... -
-
Don S/V ILLusion replied to the thread Catalina 320 Engine Starting procedure.Many of those things are routine normal maintenance items, e.g., checking filters, oil level, battery capacity and SOC, etc… which... -
jssailem reacted to Ralph Johnstone's post in the thread Jabsco Model 3600 diaphragm bilge pump. The pump operates, but it doesn't seem to generate enough suction with Ha.
Dang, another term I'll have to add to my nautical vocabulary :facepalm:. -
Don S/V ILLusion replied to the thread Hunter 33.5 compression post replacement without de-masting — feasible?.What is a “permanent” adjustable jack post? Adjustable posts are designed and intended as temporary. calling it permanent doesn’t change...
-
Ralph Johnstone replied to the thread Jabsco Model 3600 diaphragm bilge pump. The pump operates, but it doesn't seem to generate enough suction.Dang, another term I'll have to add to my nautical vocabulary :facepalm:.
-
jssailem reacted to BigEasy's post in the thread Hunter 33.5 compression post replacement without de-masting — feasible? with
Helpful.
Did this repair on my 1988 Hunter 33.5 approximately 23 years ago. we removed the mast & advise you do the same to enable you to reseal... -
Rich Stidger replied to the thread Hunter Legend 40.5 fresh water tank leak.@Milton1979 , Welcome to the forum. I have a 1997 h40.5, and the only leaks I have ever had with the side belly tanks are through the... -
-
It's not the length of the luff that determines whether the sail's foot clears the lifelines or is a "decksweeper". It's the length of...
-
jssailem replied to the thread Furler Q’s.Yes. I used the halyards to hold the mast in place while I removed the forestay with the furler (forestay ran through the center of the...
-
kloudie1 reacted to BigEasy's post in the thread Hunter 33.5 compression post replacement without de-masting — feasible? with Like.
Did this repair on my 1988 Hunter 33.5 approximately 23 years ago. we removed the mast & advise you do the same to enable you to reseal...
-
kloudie1 replied to the thread Jabsco Model 3600 diaphragm bilge pump. The pump operates, but it doesn't seem to generate enough suction.I would suspect that there is some debris in the check valves. That would be the most likely cause. Other causes would be bad wiring...
-
Joe replied to the thread Single-Handed Advice - Whisker Pole and/or Asymmetric Spinnaker.That boat is small enough, and the sail will be too, to handle everything from the cockpit. You just need to get some experience on how... -
Joe replied to the thread New Headsail Adjustments.It's not the length of the luff that determines whether the sail's foot clears the lifelines or is a "decksweeper". It's the length of...
