All Activity
-
BigEasy reacted to Ralph Johnstone's post in the thread Looking for plexiglass washboards for a Catalina 34 with
Like.
This kind of washboard ................... ? First time I've heard that term used for hatch boards. I would presume that hatch... -
BigEasy replied to the thread Hunter 33.5 compression post replacement without de-masting — feasible?.Did this repair on my 1988 Hunter 33.5 approximately 23 years ago. we removed the mast & advise you do the same to enable you to reseal...
-
cephius (Dave) replied to the thread Single-Handed Advice - Whisker Pole and/or Asymmetric Spinnaker.The Asymmetrical (or cruising) spinnaker requires a haulyard, a tack line, and at least one sheet. The tack line runs through a tack... -
shemandr replied to the thread Furler Q’s.There is a warning out there that if someone uses modern cordage for the headsail halyard that they can make the halyard the de facto... -
jssailem replied to the thread Hunter 33.5 compression post replacement without de-masting — feasible?.The safe process is to remove the mast. This also allows you to inspect the mast and address any age-related repairs/replacements that... -
If your mast has a standard Isomat NG2 mast head Rig Rite has the dimensions for the mast head sheaves. NG2 Masthead Assembly If your...
-
jssailem replied to the thread Help! Rotted wood in 1982 javelin - structural or aesthetic issue?.:biggrin: :beer: It is a process. Best of luck. I suspect the value of a Javelin with the issue you described would likely be $400–$900...
-
jssailem reacted to jakenelson345's post in the thread Help! Rotted wood in 1982 javelin - structural or aesthetic issue? with Like.
@shemandr and @jssailem - thanks for both of your thoughts. I was able to have someone who knows a little more actually check out the...
-
kloudie1 reacted to jakenelson345's post in the thread Help! Rotted wood in 1982 javelin - structural or aesthetic issue? with Like.
@shemandr and @jssailem - thanks for both of your thoughts. I was able to have someone who knows a little more actually check out the... -
Ccolemj replied to the thread Hunter 33.5 compression post replacement without de-masting — feasible?.I have removed a compression post from our previous boat (40' catamaran) without removing the mast. If you loosen the rig, the only...
-
-
Ddlochner replied to the thread Almost there. Few more questions.A simple single block with a swivel appropriately sized for the line. A Harken 29mm Carbo Air block would be a good choice if you down...
-
Ddlochner replied to the thread Almost there. Few more questions.It will work better if there is a block at the end of the boom. Also the line size looks pretty big. On a 15' boat ¼" or 5/16" will...
-
I've pulled my forestay and held the mast up for several weeks using a halyard and spinker halyard - essentially two halyards - without... -
Fred. During the process of replacing my furler, my rigger used halyards to secure the mast. It took about 48 hours to remove the old...
-
Thanks Bob. The beauty of cell phone cameras. You can get in everywhere. I've read a posting on this site from way back suggesting the...
