All Activity
-
CCYQK replied to the thread Dinghy repair glue.Thanks will contact Zebec and ask what material it is
-
sailme88 replied to the thread Rubbing edge return to normal.I replaced the entire rub rail a few years ago. Catalina Direct suggested a bucket of hot water to soak the rubber in. The bucket gig... -
IIndysailor replied to the thread Rubbing edge return to normal.I did something similar a long time ago. Gentle heat worked, I just put it in a black garbage bag in the sun for an hour, but a heat gun...
-
-
cephius (Dave) replied to the thread Single-Handed Advice - Whisker Pole and/or Asymmetric Spinnaker.There is a sock/bag that Asymmetrical spinnakers can be pulled out of, and pulled back in to. It would allow you to hoist/retrieve it... -
kloudie1 reacted to dLj's post in the thread Polish and UV protect Beckson portlight lens? Or replace? with
Like.
It's my understanding that after polishing well, you need to spray paint them with clear UV spray paint. Something like Krylon Clear... -
Ccolemj replied to the thread Dinghy repair glue.Gflex for sure on hypalon. Better than the special glues. I'd also say Gflex for PVC, but @dmax implies not to. Is there a reason not...
-
shemandr replied to the thread Single-Handed Advice - Whisker Pole and/or Asymmetric Spinnaker.Great question. I'm not so well versed in the asymmetrical. It's an 18' boat. So going on the bow is a little dicey. At least for... -
Cest La Vie replied to the thread Noisy carp on the bottom.Unless they mate 4-5 months, afraid the mating thing is an urban myth. Hate to the spoilsport, but they are just feasting on the... -
Stu Jackson reacted to dLj's post in the thread Polish and UV protect Beckson portlight lens? Or replace? with Like.
It's my understanding that after polishing well, you need to spray paint them with clear UV spray paint. Something like Krylon Clear... -
Ralph Johnstone replied to the thread Hunter Legend 40.5 fresh water tank leak.Welcome to the site @Milton1979 . There should be access to the outlet as there is a valve at the tank outlet. Have you checked your... -
Ralph Johnstone replied to the thread Polish and UV protect Beckson portlight lens? Or replace?.The polishing doesn't penetrate the acrylic. The surface microscopic cracks probabaly fill with wax during the polishing process and...
-
-
AaronD reacted to Davidasailor26's post in the thread Help wrapping up solar setup.. Few Fuses and Gauge questions. with
Helpful.
Always start by figuring out your loads, then size the wires based on the loads, then size the fuses based on the wires. You’ll have a... -
thinwater replied to the thread Anchor chain corroding after 2 years.I would not assume. The simple answer is to go sailing in 10-20 knots hard on the weather, and then walk to the bow and look. Is there... -
How romantic :facepalm: .
