All Activity
-
Johann replied to the thread Heat generation from Victron DC to DC Charger.The Wakespeed has the ability to adjust output based on RPM, as does the Zeus. The Zeus just has an easier interface (from the old... -
Ccolemj replied to the thread Heat generation from Victron DC to DC Charger.No argument there. My point was that the Hitachi 60A should never be connected to lithium at all. The only way to do that is to...
-
Vinylester is great. However, it is a bit persnickety to use because it requires a narrower range of environmental conditions, closer... -
Ccolemj replied to the thread Gelcoat over Epoxy.Vinylester is great. However, it is a bit persnickety to use because it requires a narrower range of environmental conditions, closer...
-
Ccolemj replied to the thread Gelcoat over Epoxy.I intentionally stayed away from that point to stay on topic of gelcoat over epoxy, but now that you brought it up... The use of epoxy...
-
Ccolemj replied to the thread New Headsail Adjustments.When that sail is fully raised, it looks like it won't interfere with the lifeline anymore. Why isn't it fully raised? Mark
-
shemandr replied to the thread Would try sailing one of these flying boats?.No. SAIL had a review in the last issue. The author claimed that it is much easier to sail than imagined. He's probably a lot younger... -
shemandr replied to the thread New Headsail Adjustments.It looks to me like the sail needs halyard tension. Is the top of the at the sheave or stopper? If so, I think it may be too long...
-
Stu Jackson replied to the thread Overheat adventure on 1985 Universal M12.But it could leak when the pump/engine is off. Engine Coolant Flow 101 Maybe this will help you understand the coolant flow... -
Stu Jackson replied to the thread New Headsail Adjustments.What is the situation at the head of the sail? Photos? Of course you can add a pennant at the foot.
-
Stu Jackson replied to the thread Re: 1984 Hunter 27 - Bow Damage.While this is a possible quick coverup, i suggest you consider the implications of a large area at the bow of your boat being made of...
-
Alan Gomes replied to the thread Gelcoat over Epoxy.I had my local boat yard use it for a couple of blister repairs during my haul out at the end of last year. No problem at all obtaining...
-
JRacer replied to the thread New Headsail Adjustments.Unless it is not all the way pulled up to the top of the stay, it's a "deck sweeper", intended to be at deck level. -
Phil replied to the thread Wednesday is Photo Day 2025.Cook's Bay Mo'orea. -
Alan Gomes replied to the thread Gelcoat over Epoxy.How about using vinylester resin? It makes a much better secondary bond to polyester, is far more impervious to blistering (below the...
