All Activity
-
Davidasailor26 replied to the thread Increased water tankage (H376-H380-H38).If you’re going 8 days on 280L but what to cruise for 3-4 weeks, you’re going to need a pretty substantial increase - probably adding at... -
smokey73 replied to the thread Lithium and Start Battery Load Management.The generator will powering the AC Panel, which has a ProNautic Charger that will be programmed for a Lithium profile so the generator... -
Davidasailor26 replied to the thread Lithium and Start Battery Load Management.That sounds reasonable to me. None of those things really need the capacity and deep discharge capability that lithium provides, and if...
-
smokey73 reacted to Captain Larry-DH's post in the thread Lithium and Start Battery Load Management with
Like.
The generator starter should have its own lead acid start battery, or share the propulsion engine start battery. The halyard winch can... -
smokey73 replied to the thread Lithium and Start Battery Load Management.For further discussion, lets confine our consideration to "in-rush" current. Take a look at @Maine Sail article. I have bolded a few...
-
Stu Jackson replied to the thread Lithium and Start Battery Load Management.And our real question to you remains: what is the generator starting load? Also, try another way to look at it: Maine Sail has shown... -
thinwater replied to the thread Anchor chain corroding after 2 years.ACCO. Before that I had one from Peerless. It was fine. I've had other chains of unknown origin. The only parts that corroded quickly... -
I forgot to mention that in my post. Tks for the reminder. -
Schaefer | SKU: SCH60-78 Schaefer Cleat, Jam, 4"(102mm), Silver Schaefer | SKU: SCH70-17 Schaefer Fast Entry Cam Cleat Assembly...
-
kappykaplan replied to the thread Engine blower vent install.I forgot to mention that in my post. Tks for the reminder. -
Allan12210 replied to the thread Engine blower vent install.Unless the fan motor is rated explosion proof, you don't want to pull potential gas fumes through it. To push clean fresh air out would...
-
kappykaplan replied to the thread Engine blower vent install.I'd definitely go with exhaust then. Cheers!
-
Don Crowther replied to the thread Packing Gland.I'm going to call the store in the morning and see if they have any teflon. -
Don Crowther replied to the thread Packing Gland.When I get back to the boat I'll give that a try. That teflon looks very thin to me. I did buy some 1/4 inch packing but was only able...
-
fred1diver replied to the thread Engine blower vent install.Yes we have an old atomic 4