All Activity
-
Richard19068 replied to the thread The Dreaded Head.Yes. Get the book. Read it through and then ask your questions. You probably won't have many at that time but if you do they will be... -
Terry Cox replied to the thread Hunter boarding ladder platform.....Made this boarding step several years ago. Works great, durable and very handy... -
Stu Jackson replied to the thread Aft cleat for Jib Sheets?.Please don't confuse what I meant. I do know the difference. Absent the time it would take to post photos of the different types here... -
jssailem replied to the thread DIY Bowsprit Anchor Hanger made of ROPE? Danforth Anchor.Or have short legs. -
Thanks. Heading back to the boat in a couple of days. I was thinking of using talcum powder or something similar to find the direction...
-
Rich Stidger reacted to jssailem's post in the thread Hunter boarding ladder platform.... with
Like.
Such complaints miss the elegance of a small step for a dainty foot while boarding a magnificent ship.:biggrin::biggrin: -
Rich Stidger reacted to Stu Jackson's post in the thread Hunter 41DS prop shaft to gearbox key way falling out with Like.
Putting aside the shaft scoring issue and dealing ONLY with the key: I actually found NO key once!!! I went and got another one...
-
I managed to find a leak recently by taping plastic over all the places nearby (on the outside of the boat) that I suspected, and...
-
This may help: Crimp Heat Shrink Terminals Like a Pro
-
jssailem replied to the thread Express 35 quadrant stop.When the plastic breaks, the only solution is to replace the part. I found success with Fisheries Supply in Seattle. I have also found...
-
John, mine is the Mk2 not the + model. The ring is ok. I managed to break one of those three pins on the inside of the cover that...
-
jssailem replied to the thread The Dreaded Head.What type of head do you have? Your query says you replaced the joker valve. The assumption is that the replacement was properly...
-
jssailem replied to the thread Masthead for a Montgomery 17.Long shot ideas. Jerry Montgomery designed the Sage 17. I understand Sage Marine, in Colorado, was closed about 2021. You may be able to...
-
PPAC3142 replied to the thread Hatch riser identification.Specifically, try https://shop.hunterowners.com/hp/hunter_hatch.php?m=35.5&c=1&p=53688
-
markgoldfarb replied to the thread The Dreaded Head.I have a 1994 Hunter 37.5. I have changed the joker valve and ran a snake into the tank. And yet when i return to the boast the head is...
