All Activity
-
Rick Webb replied to the thread Swap a Catalina mast for a 14.2 Capri mast.Old masts are around. It is just a matter of time and effort to find one. You will probably find a boat in better shape someone wants... -
Rick Webb replied to the thread Swap a Catalina mast for a 14.2 Capri mast.If the sections are similar diameters go for it. The only issue I can think of is if the 22s mast is much larger and heavier than the...
-
Rick Webb replied to the thread Terminal connectors.Looking good. Certainly good enough for the girls we date.
-
Ddlochner replied to the thread Heavier Mast.How much heavier? More weight aloft will raise the CG and make the boat less stable.
-
Ddlochner replied to the thread Swap a Catalina mast for a 14.2 Capri mast.Other than the length, are the dimensions and sections similar? What about the mast weight? Rigging size? The biggest factor will be...
-
Davidasailor26 reacted to dlochner's post in the thread Fiberglass hull storm damage repairs with
Like.
Ed and I have our boats in the same yard, I was there today so I stopped and took a closer look. The exposed glass looks like it is... -
Ddlochner replied to the thread Fiberglass hull storm damage repairs.There is no evidence of a significant impact to the hull, the damage is all from abrasion and rubbing against a dock. The gel coat is...
-
Ddlochner replied to the thread Hunter 41DS prop shaft to gearbox key way falling out.This afternoon I installed a new prop shaft and took a few photos of the coupler before it was installed on the shaft after they had...
-
-
Ddlochner replied to the thread Fiberglass hull storm damage repairs.Ed and I have our boats in the same yard, I was there today so I stopped and took a closer look. The exposed glass looks like it is...
-
-
JJschen01 replied to the thread Looking for Hatch Rails - 1984 ODay 222.Call Rudy at D&R Marine (508) 644 3001. He has all of this. I replaced all my teak and it fit perfectly.
-
Dalliance replied to the thread Furling line control.My furler line runs through a ratchet block at the toe rail and to a cam cleat on the outside of the coaming with a G10 backing plate... -
-
That is not the route I would go. A ratchet block with a cam cleat will work and allow for a quick release of the line if necessary. The...
-
I went with an in-line strainer. Worked great. It was simpler than changing the fitting, and I had it in the might-need bin. I cleaned...
-
Allan12210 reacted to MandyM's post in the thread Changing the faucet in the head of a 2007 Hunter 2007 - it won't budge. with Like.
Thanks for all your help. The faucet is off! First step was removing the top section that was screwed in. From there is came apart... -
Aarf145 reacted to dlochner's post in the thread How to thread mainsheet through the boom??? I ca with Like.
Use an electrician's fish tape. Feed the tape from the exit point forward to the end of the boom. Attach the mainsheet to the fish tape...
