All Activity
-
kappykaplan replied to the thread Best 4 PIN thru-deck electric connection for mast?.The female pins are actually receivers for the male pins - but you knew that! -
fred1diver replied to the thread DIY Bowsprit Anchor Hanger made of ROPE? Danforth Anchor.Ok, not exactly sure I understand exactly what you need, but from what I understand you might make a loop out of dyneema for one side... -
Hayden Watson replied to the thread Adding a valve to the black tank outlet.I was looking through the offering of non-macerator pumps and came across this one. My black tank is only 18 gallons so this would take... -
jssailem replied to the thread Adding a valve to the black tank outlet.The CG was giving away large Orange Zipties to secure the valves on the boat at the Seattle Boat Show. Of course, you can remove a... -
jssailem reacted to Hayden Watson's post in the thread Adding a valve to the black tank outlet with
Like.
RV 1½" gate valve would go between the tee from the tank and the macerator. The outlet from the macerator is a 1" hose and it would go... -
Good morning, Fred. Defender has a tank vent suitable for water tanks here: https://defender.com/en_us/sea-dog-gas-tank-vent-352100-1
-
Hayden Watson replied to the thread Adding a valve to the black tank outlet.RV 1½" gate valve would go between the tee from the tank and the macerator. The outlet from the macerator is a 1" hose and it would go...
-
Ccolemj replied to the thread Anchor chain corroding after 2 years.I'm not the only one. I'll just leave these links here for others (they popped up quickly on a search, and there are not the only...
-
You will want to examine the outside. It appears in the image that the outer rim is threaded onto the port that extends through the... -
jssailem replied to the thread Portlight removal / rebedding.You will want to examine the outside. It appears in the image that the outer rim is threaded onto the port that extends through the...
-
Try a heat gun to soften old caulk. Use a thin blade putty knife to open a gap between the port frame & gelcoat. Continue applying...
-
Ccolemj replied to the thread Anchor chain corroding after 2 years.Sigh. Blame the victim. As I mentioned earlier, in the first case, ACCO admitted it was their chain, admitted it had failed, and...
-
jssailem replied to the thread Hard top dodger.SO True. :biggrin: Have you considered one of the many anchor alarm systems on chart plotters, phones, pads, or tablets? I have used...
-
BigEasy replied to the thread Portlight removal / rebedding.Try a heat gun to soften old caulk. Use a thin blade putty knife to open a gap between the port frame & gelcoat. Continue applying...
-
jssailem replied to the thread Adding a valve to the black tank outlet.A couple of questions. The RV valve makes me cringe if it is to stop raw water from entering the boat. I have seen those valves on RVs...
-
