All Activity
-
Richard19068 replied to the thread Old 1973 Mercury Outboard (4hp) jumps out of water in REVERSE.do either of these schematics look like your engine? They both have parts related to reverse locks... -
Ddanm1 replied to the thread Boat towing in San Juans, Gulf Islands, Discovery Islands.I have Progressive and have used the towing coverage on the East Coast. Technically, you are supposed to call their toll free number and...
-
Obvious, really. Don't pull the sail down that far when reefing. The tack does not need to reach the gooseneck. The clew does not need... -
Adjust the reefing points on the sail.
-
JoeWhite replied to the thread Old 1973 Mercury Outboard (4hp) jumps out of water in REVERSE.It was designed to be pulled up so that when you have it on a trailer you can lift it and keep it away from making contact with road.
-
Not really true. My current boat, for example, does not have horns. The prior boat was single line--you could vary the height. If you... -
thinwater replied to the thread Keep boom off Bimini.Not really true. My current boat, for example, does not have horns. The prior boat was single line--you could vary the height. If you... -
-
Davidasailor26 replied to the thread Keep boom off Bimini.Are you sure that when you’re reefing you’re getting the clew all the way to the boom when reefing? If the sail is cut right the boom...
-
I'm totally with you on the day sailing and it's pretty much the same story here too. When I was younger and more excited, I day sailed... -
thinwater replied to the thread Keep boom off Bimini.Obvious, really. Don't pull the sail down that far when reefing. The tack does not need to reach the gooseneck. The clew does not need...
-
kappykaplan replied to the thread Keep boom off Bimini.Adjust the reefing points on the sail. -
BigEasy replied to the thread Old 1973 Mercury Outboard (4hp) jumps out of water in REVERSE.Had a 50 HP Merc ( circa 1981) that had a similar problem. There was a bracket with a hook that swiveled down to engage a horizontal... -
Prior to installing a furling boom with a rigid vang, I lowered my bimini by a couple inches. Then I lowered it a couple more inches... -
Rich Stidger replied to the thread Keep boom off Bimini.Prior to installing a furling boom with a rigid vang, I lowered my bimini by a couple inches. Then I lowered it a couple more inches... -
Rich Stidger reacted to MandyM's post in the thread Changing the faucet in the head of a 2007 Hunter 2007 - it won't budge. with
Like.
Thanks for all your help. The faucet is off! First step was removing the top section that was screwed in. From there is came apart...
