All Activity
-
Hello all, doing some woodwork, I applied Cetol a few days ago, but it is still tacky, any ideas on what could cause that issue? It... -
-
jssailem replied to the thread VC17 Recoat Prep.Looking for a Merka sander, I found MIRKA sanders. And wow, they are expensive. Mirka DEROS is equipped with intelligent features such... -
A simple and inexpensive Wire Tracer set such as the Klein VDV500-705 makes tracking wire on a boat very easy. Just make sure the power...
-
Great thread, tackling this task this weekend. Using all the advice here so thank you.
-
jssailem replied to the thread Changing the faucet in the head of a 2007 Hunter 2007 - it won't budge..It screws down from the top. That is so not like any home plumbing. It may require a lot of PB BLaster or penetrating oil spray to...
-
jssailem reacted to Rich Stidger's post in the thread Changing the faucet in the head of a 2007 Hunter 2007 - it won't budge. with
Like.
I apologize in advance for not providing this info much sooner. After seeing the additional pix of the faucet in question, I knew that... -
jssailem replied to the thread Funny Friday!!!.
-
-
Stu Jackson reacted to Rich Stidger's post in the thread Changing the faucet in the head of a 2007 Hunter 2007 - it won't budge. with Like.
I apologize in advance for not providing this info much sooner. After seeing the additional pix of the faucet in question, I knew that... -
JoeWhite replied to the thread C30 Electrical Question.The ground strip should have one large cable , usually connected to one end of the screw terminal strip, and the other end is connected... -
patrickfarley replied to the thread Two hours AC.Changing plans. l am going to put up a Styrofoam wall along the back of the v berth. The wall will separate the v berth for hot air... -
Rich Stidger replied to the thread Changing the faucet in the head of a 2007 Hunter 2007 - it won't budge..I apologize in advance for not providing this info much sooner. After seeing the additional pix of the faucet in question, I knew that... -
-
Scott T-Bird replied to the thread To paint or not to paint.I'm having a hard time understanding your entire post. You say it was "painted on top" but you are sure it is original gelcoat. What... -
I followed Maine Sail's tutorial on a 1983 Oday 25 back in 2012. The gelcoat came back great. I could read my watch in the reflection...
-
Dalliance replied to the thread VC17 Recoat Prep.I had the same thing happen a couple years ago. A dry scotch pad was too slow, scotch pad with water was a mess and made it harder to...
