All Activity
-
Ddlochner replied to the thread OD 23-2 chain plate slipped/bulkhead soft. Patch or replace bulkhead?.Replace the bulkhead. To patch the bulkhead it would be necessary to cut out all of the rotting bulkhead and then scarf a new section of...
-
Don S/V ILLusion replied to the thread OD 23-2 chain plate slipped/bulkhead soft. Patch or replace bulkhead?.The consequence of a poor repair can be catastrophic. Removing the chainplate to inspect the condition of the bulkhead wood is the... -
Don Crowther replied to the thread Epoxy Paint.No painting company here. It's all DIY and any club members that you can convince to help. But everyone is in the same boat getting... -
patrickfarley replied to the thread Two hours AC.AC drains into the bilge -
Thanks for all the input. decided to use a combination of the methods and ideas given. Cut off the shackle at the old eye splice then... -
patrickfarley replied to the thread Two hours AC.I still need to attach and install both parts with solar panels.
-
patrickfarley replied to the thread Two hours AC.AC installed and it works. It was 90 degrees and it pulled 540 watts but it cooled down to 80 degrees.
-
patrickfarley replied to the thread Two hours AC.
-
-
Ccolemj replied to the thread Little help with Replacing Tabbing (first time doing this..).I think he finished the project a while ago. Most of the subsequent discussion was about fiberglass work in general, and his questions...
-
CCalif. Ted replied to the thread What is this?.a "Diaphragm Fog Horn" you blow in the small hole on the side. There is a diaphragm of what looks like plastic wrap across the big hole...
-
jssailem replied to the thread microbes in my diesel.As I explained, I too combated fuel bugs. It was persistence and consistency that resolved the problem. I stopped water from entering...
-
jssailem reacted to Stu Jackson's post in the thread Replacement roller furling for a 1979 Hunter 30 with
Like.
I had a CDI on my boat when I bought then then 12-yesr-old vessel in 1998. You need to know that this furler had (and still has) a... -
Stu Jackson replied to the thread Replacement roller furling for a 1979 Hunter 30.I had a CDI on my boat when I bought then then 12-yesr-old vessel in 1998. You need to know that this furler had (and still has) a... -
jssailem replied to the thread Updating Upholstery Oday 222 1984.Welcome to the forums here at SBO. It is difficult to understand how you feel about the vintage boat interior. It was the late 60's...
-
-
An option to consider is to take the cushions to an automobile upholstery shop to have them duplicated with whatever fabric you desire...
