All Activity
-
Ddlochner replied to the thread Express 35 quadrant stop.Unfortunately I don't have a photo, the rudder stops on my Sabre are short pieces of ¼" angle iron attached to a bulkhead on either side...
-
Ddlochner replied to the thread 1982 Cherubini w 12 HP Yanmar - Hull Speed?.Don't hold your breath waiting for a response. The post is about 8 years old and the poster hasn't been seen in 5 years.
-
Ddlochner replied to the thread 1985 Hunter 34 Deck Repair Help.The crack looks like it is only gel coat. On sharp outside corners gelcoat often cracks because there are voids between the gelcoat and...
-
shemandr replied to the thread Funny Friday!!!.They can be. I’ve seen one attack a fishing boat. I think the swan and the fisherman had some history. But the swan flew directly at... -
Ralph Johnstone replied to the thread Replacing Prop Shaft for 84 Hunter 31.Our engines are different. Your engine is rated as a13 HP (2GM) while mine (2GM20) is rated as 18 HP for 3600 RPM. Different Xmission... -
Don't buy old technology A/C today, and definitely don't try to keep a 31yo system going with replacement parts unless they are simple... -
:plus::biggrin: -
Ccaptcoho reacted to Rich Stidger's post in the thread Bottom paint - 2 coats or 3? Or even 4? 5? Why not 6? with
Like.
FWIW- I have found that 2 year paints don't work well in the second year, regardless of the manufacturer's claims. I've also found that... -
RAhoy fellow Hunter sailors, I need to replace the roller furling on my 1979 Hunter 30. I am curious on what people consider the best...
-
Ccaptcoho reacted to Davidasailor26's post in the thread Bottom paint - 2 coats or 3? Or even 4? 5? Why not 6? with Like.
If more coats yielded better performance you’d probably see paint manufacturers recommending that. They’re certainly not incentivized to...
-
Ccaptcoho reacted to Winging It!'s post in the thread Can someone tell me what the fiberglass bump/roll is on port/aft bilge area of C 22? with Like.
That is the liner. The bump keeps your stuff from sliding into the deep unknown.
-
Ralph Johnstone replied to the thread Replacing Prop Shaft for 84 Hunter 31.Hi Dario, Of course, numerous questions here. I see you had a two blade prop and have now changed to a three bladed prop. My original...
-
-
This is one of the reasons I now use knots and not splices. The other reason is so if the point of connection becomes worn, I loose less... -
-
They should try that on the fence around my apiary. 3.7 joules per ZAP! -Will
