All Activity
-
jssailem replied to the thread resignation.One life chapter finishes, and a new chapter begins. Fair winds. Be not a stranger. Alan & Eileen -
jssailem replied to the thread New windlass for Papillon..You might consider installing an anchor counter. While not a perfect solution, I am guessing they could be accurate to within a couple...
-
I fully agree that you need to be at the bow to retrieve the anchor. In my case, I will need to handle the nylon rode into the aft...
-
I don't think a remote switch for the windlass at the helm is a very good idea. The anchor below was fouled in the chain about half way...
-
jssailem replied to the thread Hunter 336 gelcoat repair.Oh come now Ralph. You know you could appreciate Oyster Shell White.
-
jssailem reacted to CABixler's post in the thread Mast mounted plastic resin halyard cleat for jib replacement? with
Like.
Thanks to all!! I did find exact replacement at US Spars. Easy webpage to look up. Resin was $17 but Aluminum Anodized was $30 so went... -
jssailem replied to the thread Bottom Paint for Puget Sound.Hope you are successful. I have had a good experience with Trinidad in the waters of Port Everett. My diver likes it. Has made his job...
-
I fully agree that you need to be at the bow to retrieve the anchor. In my case, I will need to handle the nylon rode into the aft... -
Boat was put on the hard today for a full bottom job and strut replacement. I ordered the strut through the parts section on this...