All Activity
-
jssailem replied to the thread Bottom Paint for Puget Sound.Hope you are successful. I have had a good experience with Trinidad in the waters of Port Everett. My diver likes it. Has made his job... -
I fully agree that you need to be at the bow to retrieve the anchor. In my case, I will need to handle the nylon rode into the aft... -
Boat was put on the hard today for a full bottom job and strut replacement. I ordered the strut through the parts section on this...
-
BigEasy reacted to CABixler's post in the thread Mast mounted plastic resin halyard cleat for jib replacement? with
Like.
Yep you were spot on. Mine was also US Spar. Easy to deal with. -
PAnyone out there know how the Morgan 34 mast step is engineered? Our sole has essentially rotted away around the step, which seems to be...
-
I fully agree that you need to be at the bow to retrieve the anchor. In my case, I will need to handle the nylon rode into the aft... -
Allan12210 replied to the thread UV Damage to Seadog Dorade Cowl Vents.Usually acetone takes care of that. I think it's just the plasticizer leaching out. Painting afterward seemed to control it later. The... -
Allan12210 replied to the thread UV Damage to Seadog Dorade Cowl Vents.Stoddard solvent? It has a unique smell.
-
fred1diver replied to the thread Window woes.For the frame to the cabin, I have no issues, it is really the window to the frame that I am having issues with -
Ddlochner replied to the thread Window woes.There are 2 places to seal, the frame to the cabin sides and the glass in to the frame. The vinyl glazing seals the glass to the frame...
-
CABixler replied to the thread Mast mounted plastic resin halyard cleat for jib replacement?.Yep you were spot on. Mine was also US Spar. Easy to deal with. -
CABixler reacted to jssailem's post in the thread Mast mounted plastic resin halyard cleat for jib replacement? with Like.
While plastic cleats are lightweight and tend to be inexpensive, they are slippery suckers. The typical double braid yacht line tends to...
-
CABixler reacted to Caboteur's post in the thread Mast mounted plastic resin halyard cleat for jib replacement? with Like.
Had the same problem, picked up a pair at a local Bénéteau dealer: they were a regular stock item. The sun & salt makes them brittle...
-
CABixler replied to the thread Mast mounted plastic resin halyard cleat for jib replacement?.Thanks to all!! I did find exact replacement at US Spars. Easy webpage to look up. Resin was $17 but Aluminum Anodized was $30 so went...
-
Hello Below replied to the thread Window woes.Très cher but delivered to your door in a few days. GE SCS2000