All Activity
-
Maine Sail replied to the thread Acceptable methods for connecting three or more wires.So, you've done the training, attended the standards meetings, voted on changes, passed the certification etc.? The standard is clear... -
Side entry is safer to use, IMHO. the bow and stern will magnify any hobby horsing if you're anchored in choppy water. -
Stu Jackson replied to the thread Nonsuch 26 rigging (cradle lines).You're very welcome. Whenever I look on the internet for something the very LAST thing I ever do is post question on what, for boating...
-
Ralph Johnstone replied to the thread Bottom paint - 2 coats or 3? Or even 4? 5? Why not 6?.It has been stated too many times that "Location, Location, Location" is the controlling factor when dealing with each of the many... -
-
BigEasy reacted to Caboteur's post in the thread Mast mounted plastic resin halyard cleat for jib replacement? with
Like.
Had the same problem, picked up a pair at a local Bénéteau dealer: they were a regular stock item. The sun & salt makes them brittle... -
Ddlochner replied to the thread 1989 Beneteau 35S5 Skeg dropped down on.The picture shows a strut. First step is to inspect inside the hull where the strut is anchored. Pictures of that area will help. In...
-
-
Caboteur replied to the thread Mast mounted plastic resin halyard cleat for jib replacement?.Had the same problem, picked up a pair at a local Bénéteau dealer: they were a regular stock item. The sun & salt makes them brittle... -
jssailem reacted to FastOlson's post in the thread 1989 Beneteau 35S5 Skeg dropped down on with
Helpful.
Pictured is the bronze casting that hold the cutlass bearing, which supports the shaft. That is not a "skeg". Alarming image , and a... -
jssailem replied to the thread DE 32 thoughts and suggestions.Regarding becoming a single hander, I would recommend you devour the resources of the SFBay Singlehander Organization. Here is one of...
-
Maine Sail replied to the thread ACR's and SOC.From 50% SoC with an AGM battery it takes less than 2 min to reach 13.0V when being charged at .2C. This occurs faster if charge current...
-
Check the compression post, most are not good. replace it with one single post from ceiling to the keel. You will have to cut the corner...
-
Caboteur reacted to FastOlson's post in the thread 1989 Beneteau 35S5 Skeg dropped down on with Like.
Pictured is the bronze casting that hold the cutlass bearing, which supports the shaft. That is not a "skeg". Alarming image , and a...
-
jssailem reacted to jaysweet's post in the thread Sorting out reefing system 1986 Legend 37 with Like.
Just a comment about having to take the boom ends off. I have a Selden boom that has a car system inside for the outhaul line. When I...
-
jssailem replied to the thread Bottom Paint for Puget Sound.If you were not having so much fun doing the OT you could spend more time with your toys.
-
I do my own bottom work. After the yard crew pressure washes the bottom, I let it dry overnight. Next day I scrape off any loose paint...
