All Activity
-
BigEasy replied to the thread Shifter cable.Thats going to be a B…. trying to remove those corroded clamp bolts. Would it be possible to grind the heads off the clamp bolts &... -
fred1diver replied to the thread Shifter cable.I do not know yet if the clamp bolts are seized, I simply cannot access the clamp at the moment -
Ddlochner replied to the thread Shifter cable.There isn't much space in the pedestal to work. Lots of PB Blaster or Liquid Wrench, time, heat, and an impact driver on the bolt...
-
fred1diver replied to the thread Shifter cable.I sourced the replacement cable, just trying to get the cable clamp from the pedestal off. That one is a real headache I see 2 options...
-
Terry Cox replied to the thread Happy New Year PNW Cruisers!.Time flies when you're having fun. -
Terry Cox replied to the thread Cruising the BC Gulf Islands..Hi Stu. Thanks for the info. It's been several years since clearing at Sydney. Did not seem difficult at the time. Also, did not realize...
-
BigEasy replied to the thread Shifter cable.Photo 1 clearly shows the plastic cable cover split & underlying metal cable casing corroded. @fred1diver is absolutely correct in...
-
All manufacturers of these shift/throttle cable say do not lubricate them. They are teflon lined and permanently lubricated. If the...
-
When you run the cables watch out for the bend radius, the cable will bind up if the radius is too small. Also watch out for chafe on...
-
The manufacturer name may be on it, but many of the manufacturers have traded hands or stopped production, so going by that isn't always...
-
kloudie1 reacted to kappykaplan's post in the thread IT IS HAPPENING... FIRE and WATER mixing together in Yosemite National Park, CA with
Like.
But a nice optical illusion! :beer: -
Ccolemj replied to the thread Shifter cable.I see that now that you point it out. Usually these conduit systems are oriented so the cable goes straight to the conduit and no idler...
-
Ccolemj replied to the thread Shifter cable.All manufacturers of these shift/throttle cable say do not lubricate them. They are teflon lined and permanently lubricated. If the...
-
Stu Jackson replied to the thread Cruising the BC Gulf Islands..Hayden, usually Terry's right on, but do NOT clear at Sidney. Why? The dock for doing so it right at the entrance, a tricky spot to... -
quadrille38 replied to the thread Timing/order for waxing topsides when bottom painting.I use Serious Marine Cleaner to clean the topsides. It’s sprays on, I use soap and water to scrub and then spray it with hose...