All Activity
-
All manufacturers of these shift/throttle cable say do not lubricate them. They are teflon lined and permanently lubricated. If the... -
When you run the cables watch out for the bend radius, the cable will bind up if the radius is too small. Also watch out for chafe on...
-
The manufacturer name may be on it, but many of the manufacturers have traded hands or stopped production, so going by that isn't always...
-
kloudie1 reacted to kappykaplan's post in the thread IT IS HAPPENING... FIRE and WATER mixing together in Yosemite National Park, CA with
Like.
But a nice optical illusion! :beer: -
Ccolemj replied to the thread Shifter cable.I see that now that you point it out. Usually these conduit systems are oriented so the cable goes straight to the conduit and no idler...
-
Ccolemj replied to the thread Shifter cable.All manufacturers of these shift/throttle cable say do not lubricate them. They are teflon lined and permanently lubricated. If the...
-
Stu Jackson replied to the thread Cruising the BC Gulf Islands..Hayden, usually Terry's right on, but do NOT clear at Sidney. Why? The dock for doing so it right at the entrance, a tricky spot to... -
quadrille38 replied to the thread Timing/order for waxing topsides when bottom painting.I use Serious Marine Cleaner to clean the topsides. It’s sprays on, I use soap and water to scrub and then spray it with hose... -
It takes time to learn how your boat behaves under certain conditions. Wind, current, etc. all play on your boat's performance. Wrote an... -
Terry Cox replied to the thread Hunter 41DS New Owner.It takes time to learn how your boat behaves under certain conditions. Wind, current, etc. all play on your boat's performance. Wrote an... -
jssailem replied to the thread V-berth platform.In for a penny, in for a pound. The structure is not for the berth; it is to maintain the hull shape, so if you hit something in the...
-
kappykaplan replied to the thread V-berth platform.Sure looks like they provide some structural support to the bow. -
fred1diver replied to the thread V-berth platform.Hello again everyone We are getting ready to buy the tanks, we are just wondering if some plywood can be removed, one of them is... -
-
jssailem replied to the thread Mast heel deterioration Catalina Capri 14.2.It is not a serious flaw. If I liked the boat, the sails are in good shape, the boat does not leak water, I would go forward and just...
-
jssailem replied to the thread Hunter 41DS New Owner.Learn to use a spring line, and you will wonder what all the fuss is about. It will get you safely tied up, save you the hassle of...
-
