All Activity
-
I've been sitting at the dock with the shore power disconnected for about an hour with the AC running. The Percon f3000lfp shows that... -
@JamesG161 beat me to it. I've used Rustoleum with great results.
-
I made this engine belt tensioner tool I wanted to share in case it helps someone else. I have a Catalina 27 with a Universal 5411 and I... -
Don S/V ILLusion replied to the thread Power station vs AC.Maybe someone can explain - whats the benefit of these battery/inverter combo units over simply adding battery/inverter capacity to an... -
kappykaplan replied to the thread Tightening Engine Belt.As always, necessity is the Mother of Invention! :beer: -
kappykaplan replied to the thread Are you aware of ths FCC action. Is your on-board router approved?.From farther down in the document: "The FCC is explicit: existing routers are completely unaffected, no action required. Firmware and...
-
jssailem replied to the thread ICE MAKER what a joy..They come in various sizes and capabilities. I checked the size and found the Igloo to be pretty compact. Hoping it lasts for a year or... -
What indicates it had overheated ........... the engine siezed, burning smell, high temp alarm ? What RPM when you shut it down ... -
It's on my list for this season. Just need to find place to store it.
-
jssailem posted the thread Are you aware of ths FCC action. Is your on-board router approved? in Ask All Sailors.Reading the SeaBits site, I came across this new FCC action. https://seabits.com/the-fcc-router-ban-and-what-it-means-for-your-boat/
-
I was faced with running my cables from the mast to the electrical panel. The original wires were somewhere in the compression post...
-
Ward H replied to the thread ICE MAKER what a joy..It's on my list for this season. Just need to find place to store it.
-
Break it out and fire it up. I was surprised at the results.:biggrin:
-
jssailem reacted to afrayedknot's post in the thread Sizing of exhaust lines and water lift mufflers with
Like.
Thank you - I appreciate each and every nugget of advice! Tagging up with the muffler makers seems like the best next step. -
jssailem replied to the thread Topside Paint on Deck.If your deck is molded, like mine, you will need to clean out the dirt from the recesses before trying to paint. If not done with care...
