All Activity
-
I would suggest basic trigonometry to figure out the angle of heel you will need to reduce the air height of the boat to less than the... -
jssailem reacted to MFD's post in the thread Are you wondering, should I get a furling Mainsail? with
Like.
One thing I do like I do like about my inmast system is exactly that. Being able to easily have a sliver of main out, no need to go on... -
jssailem replied to the thread Rigging Quote.Congrats @jaysweet. No looking forward to hearing sailing stories.:biggrin:
-
So I got the boat launched on 6 April (earliest in many years) and motored down to Annapolis to get the newly refurbished mast stepped...
-
jssailem reacted to quadrille38's post in the thread Help with mold/midew, ozone machine, bilge/locker cleaning with
Helpful.
Be very careful with ozonators. The ozone produced is harmful to humans and can cause lung damage. So ventilate thoroughly before... -
quadrille38 replied to the thread Help with mold/midew, ozone machine, bilge/locker cleaning.Be very careful with ozonators. The ozone produced is harmful to humans and can cause lung damage. So ventilate thoroughly before... -
PPeterKnowlton replied to the thread Cpap Solutions.Put a 12/24 volt cigarette lighter outlet next to our main stateroom bunk just for this purpose. Resmed works fine. One always has to...
-
fred1diver replied to the thread Head plumbing Q’s.Ok, thank you, I will look for that material! -
Ddlochner replied to the thread Galvanic Corrosion/zinc depletion question..It's 8.5"x5.5 " and 40 pages. Not all that big. They could have cut shipping costs by using USPS Book Rate instead of regular ground...
-
Ccolemj replied to the thread Help with mold/midew, ozone machine, bilge/locker cleaning.It is on ours. ClO2 is a common commercial mold and odor killer, as well as used to treat potable water. I think it does a better job...
-
Ccolemj replied to the thread Galvanic Corrosion/zinc depletion question..Who wants a big spiral bound manual on a boat? Provide it as a pdf file. Free of manufacturing cost, and probably already in that...
-
JoeWhite replied to the thread Head plumbing Q’s.The idea is to introduce you to the type of material used for this purpose. I am sure the correct adaptor exists with this nylon material. -
Tally Ho replied to the thread Rigging Quote.+1 for the Tides Track system. But you will need new slides on the sail too. Greg -
BigEasy replied to the thread Rigger on the Chesapeake Bay.Rigger named Ken Weise relocated from my locale a few years ago & settled in vicinity of Annapolis. He was knowledgeable & his fees... -
BigEasy replied to the thread Galvanic Corrosion/zinc depletion question..Purchased a test cell from BoatZincs a few years ago and purchase donut shaft zincs annually from them as well as drop (fish) zincs...