All Activity
-
Until you fix your Stern light use this... or just a light on a stick.!!!! Masters Licensed Sailor delivered our boat and the Stern... -
mermike reacted to Maine Sail's post in the thread Lithium Battery Installation feedback requested with
Like.
DO NOT use the preset! ProMariner has zero clue how to charge LFP. Create a custom profile of 14.2V absorption & 13.5V float and you're... -
Maine Sail replied to the thread Lithium Battery Installation feedback requested.Your three switch setup is fine, no need to replace. If you want to charge via the alt a Victron XS-50 set to 40A will be The best bet.. -
OS2Dude replied to the thread Trying to install a new (used) Stern Pulpit (Railing) on 1971 C22.Unless they are 100% 316 stainless I would avoid toggles from a Big Box. Plus if you ever need to remove the railing, the toggles will... -
Joe replied to the thread Replacing a mast…and going taller?.Weld the cracks, then consider welding a reinforcement band around the base. Good to go. If you don't like the layout of this boat... -
shemandr replied to the thread Replacing a mast…and going taller?.A friend with a Ranger 26 raised his boom by about a foot or so. Of course he had to re-cut the main. That is a mast head rig so the... -
Ddlochner replied to the thread Replacing a mast…and going taller?.A taller mast with the sail raised higher will raise the center of effort and center of gravity of the boat. This will cause the boat to...
-
PYou should research replacing bottom paint. You can put ablative over hard, but not hard over ablative without removing the ablative...
-
PI don’t have any direct experience with the Hunter 31, but that picture doesn’t scare me too much. Curved surfaces like that are common...
-
PGelcoat cracking on an outside corner is not uncommon in boats. Sometimes the glass pulls away from the gelcoat before it has cured...
-
Hello Below reacted to danstanford's post in the thread Are you wondering, should I get a furling Mainsail? with Like.
Having had both I will say that if you want easy, the furling main makes a little evening sail the easiest thing you can imagine. If you... -
SSailbaum replied to the thread Rigger on the Chesapeake Bay.You can give these folks a shout Home - Performance Rigging just text or call don't email. I'm not sure whether they will travel to the...
-
fred1diver reacted to Maine Sail's post in the thread Crimp Heat-Shrink Terminals Like a Pro, On a DIY Budget with Like.
I just posted this new video... -
Ddlochner replied to the thread Hunter 31 on Delaware river.Gelcoat cracking on an outside corner is not uncommon in boats. Sometimes the glass pulls away from the gelcoat before it has cured...
-
smokey73 replied to the thread Lithium Battery Installation feedback requested.Thanks Rod. 14.2 Absorption and 13.5 Float it is. I have two "On Off" battery switches right now. One between the House Battery...