All Activity
-
heritage replied to the thread 1984 Hunter 27 - Original Bow-Cap.I have never seen a stainless steel bow cap on a Hunter 27. The cap has no structural purpose. The ss does look cool though. I have... -
Maine Sail posted the thread Crimp Heat-Shrink Terminals Like a Pro, On a DIY Budget in Musings With Maine Sail.I just posted this new video... -
Ccolemj replied to the thread Stern light Q’s.I don't know what the inspection requirements are, but it would not meet the legal requirement if you were motoring at night. Mark
-
thinwater replied to the thread Looking for ideas.More exterior wood to varnish? On purpose? Neat. But I'd put the plate on the seat beside me. -
Davidasailor26 replied to the thread Looking for ideas.I’ve never found a way to lean against that bulkhead that was especially comfortable, at least not without a couple cushions to get the... -
Ullman Sails has a loft in Hayes, VA, which would be closer than Portsmouth or Annapolis. I would contact them re for a rigger near by... -
rpwillia replied to the thread Rigger on the Chesapeake Bay.@jaysweet and @pgandw, I may have to travel as on the ES we are so far off the beaten path. Norfolk is about 12 hours by sail and...
-
fred1diver replied to the thread Looking for ideas.Everything on that side is being relocated, the stb side will only have the wind instruments -
-
I wanted an evaluation of my sails by somebody more knowledgeable than me. Didn't want to drive down to Oriental, NC or to Hampton, VA... -
jssailem replied to the thread Stern light Q’s.I just had the CG Auxiliary onboard for VSC. I told the inspector I’m not sure I can pass. He said let’s see. My stern light bulb just...
-
If you have a tricolor on the masthead, you have to have deck mounted lights too because the masthead is only for use under sail. You...
-
Ok, so quick update, I looked inside the stern lazarette and found there is no backing plates for the backstay’s chainplate, so it will...
-
jaysweet replied to the thread Rigger on the Chesapeake Bay.Hi. I was just completely re-rigged by Annapolis Rigging. I was very happy with their work. Sorry: just noticed the word “besides”… -
I have never heard of such a thing in real life. I can think of no reason to have a ‘false bilge’ above the actual keel bolts except as...
