All Activity
-
jssailem reacted to Night Watch's post in the thread Deviation from Standard Installation of Wet Exhaust with
Like.
I've also installed a through hull with a gate. I guess from all the comments I could be overthinking the issue. There's no reason I... -
jssailem replied to the thread AI and the SBO Forums--Part 1.DAVE, In the spirit of transparency, I did not understand issue as you have just stated. It sounded much to me like this was an action...
-
BBlitz replied to the thread Micron Extra SPC review.I've seen the same sucess in Sandy Hook, NJ area at a slip with no diver. A little slime underneath is all I get, the key is obviously...
-
-
To be fair, I'm not making anything out of anything. You raised the topic before there was any evidence a problem existed.
-
Captain Larry-DH replied to the thread Micron Extra SPC review.yes, and that’s why I used Trilux -
What jssailem said. Clearly, the crew were overwhelmed by the dismasting and couldn't develop and implement a recovery plan of their... -
Ccolemj replied to the thread Micron Extra SPC review.Ah, my perspective was off. It looked like a cracked rudder or something. Except you shouldn't use Hydrocoat, Micron Extra or SPC on...
-
Captain Larry-DH replied to the thread Micron Extra SPC review.If you’re referring to the little beard of growth hanging - that is coming from a thru-hull that is about 8 or 10 inches diagonally...
-
Ccolemj replied to the thread Adding port light into hull side..That Catalina pic with the port plugs wasn't very good quality. Here are some other examples, including what the ports look like when...
-
-
Ccolemj replied to the thread Adding port light into hull side..I put a 15x8" opening hatch in our hull. I think you are over-thinking the structural and strength issue wrt the hull. Just look at...
-
-
jssailem replied to the thread Deviation from Standard Installation of Wet Exhaust.My boat came with an exhaust pipe that rises 24” from the engine exhaust manifold does a 180 drops about 15” at which point the raw...
-
-
Ccolemj replied to the thread Micron Extra SPC review.What is going on near the top of the rudder? What did you paint the saildrive with? Did it work well? Mark
-
sailme88 replied to the thread Genoa Sail trim for broad reach or run.when sailing by the head alone, you have deprived the wind from slotting.. next time that you're out get that main into the mix and see... -
Ralph Johnstone replied to the thread Deviation from Standard Installation of Wet Exhaust.Don't know what those Cat guys were smoking when they came up with that exhaust system : ................ but in order to have... -
-
Ralph Johnstone reacted to Night Watch's post in the thread Deviation from Standard Installation of Wet Exhaust with Like.
I've been reviewing photos of other members exhaust hose replacement jobs, and I have a question: It appears some 30' boats (talking...
