All Activity
-
PPAC3142 replied to the thread Back stay Flicker.I understand you are asking if the flicker will be harmed when the backstay is pulled tight, which is when the flicker would be bent the...
-
Leeward Rail replied to the thread How to Reseal New Design Frameless Windows.I would love to find the idiot who put screws into the lens of our Atkins Hoyle hatch. The lens is 1/2” cast acrylic $200 raw material -
Leeward Rail reacted to RKenSailor's post in the thread How to Reseal New Design Frameless Windows with
Like.
I'm planning to pull 2 of mine off and talk to a local plexiglass place to get a quote on them fabricating new ones for me. -
Leeward Rail replied to the thread How to Reseal New Design Frameless Windows.Best part about dealing with a local shop is that you may get a wider range of tints and can see them before you buy. Glass shops may...
-
Leeward Rail reacted to Gene Neill's post in the thread How to Reseal New Design Frameless Windows with Like.
The screws in our C22 are original. I think @dlochner is correct, yours have been fiddled with by a previous owner. I don't think you...
-
You might try pulling it upward on the forward side by putting it through a jib halyard shackle then securing the lower end of the... -
You'll likely want to replace the lights on the mast and maybe wiring. If those lights are incandescent they should be upgraded to LED... -
I like @kloudie1's idea. I would think about trading the shackle for a block. It could reduce the friction and provide a better... -
BigEasy replied to the thread Replacing single rusty keelboat.Search the forum for “keel bolt torque values.” I posted a table that lists the torque values for Beneteau keel bolts. -
BigEasy reacted to dlochner's post in the thread Protecting the mast light connector and VHF connector with Like.
The tripping hazard could be minimized by moving the wire and connectors to the aft side of the mast. As a bonus, jib sheets won't hang...
-
jssailem replied to the thread Jammed pole topping lift.I like @kloudie1's idea. I would think about trading the shackle for a block. It could reduce the friction and provide a better... -
SGood morning to all Are there any owners groups or forums for S2 sailboats? I am looking into purchasing an S2 8.5 or an S2 8.6. Any...
-
kloudie1 replied to the thread Jammed pole topping lift.You might try pulling it upward on the forward side by putting it through a jib halyard shackle then securing the lower end of the... -
Lot of good observations here. Hopefully you'll figure this out soon. What we are seeing may be some modifications by the PO. I have... -
I had the same thought. That doesn’t look like Beneteau factory hardware, and those fiber reinforced clear hoses are usually not rated...