All Activity
-
@kappykaplan 8 boat bucks is a lot of boat bucks! not sure what my tolerance is, or more importantly my wife’s, but that’s a lot... -
We took the boat out last night. It's soooo much easier to pull the genoa out and it's completely smooth. Other than washing the furler...
-
The only other thing that is a maintenance item is the valve clearance..It should be checked and adjusted if necessary before any other...
-
kappykaplan replied to the thread Electronics.Sounds like a resolution issue. I've seen the same on my Garmin handheld on occasion. -
john6206 replied to the thread Electronics.We know we have many projects, also knew that after the survey…. Trying to prioritize. safety first sailing 2nd creature Comforts -
john6206 replied to the thread Electronics.Thanks for the advice everyone, we are checking into options. The problem I’ve had with Navionics… the charts on the iPad seem pretty...
-
Jjaysweet replied to the thread Painting Boat Bottom.....Copper Free Ablative Paint??.I've used Pettit Hydrocoat Eco for many years now. We're in brackish water in the mouth of the Patapsco just down from Baltimore (really...
-
kappykaplan replied to the thread Electronics.Ya gotta do what ya gotta do! I dropped almost as much into the boat as I paid for it during the first winter refit (and I knew what I...
-
john6206 replied to the thread Electronics.@kappykaplan 8 boat bucks is a lot of boat bucks! not sure what my tolerance is, or more importantly my wife’s, but that’s a lot...
-
kappykaplan replied to the thread Electronics.What's your tolerance for BOAT (break out/bring on another thousand) unit outlays? My upgrade to full Raymarine N2K network was done in...
-
capta replied to the thread Electronics.If you've had good luck with the Garmin GPS, then get a unit from them. You already have an idea of how they classify the various... -
Ccolemj replied to the thread Raw Water Pump Leaking Advice.Good info. A bit of googling finds a small price break: Pardon Our Interruption... If you don't need the carbon bushing, the kit I...
-
Hey everyone, Ive read some threads on this topic, including one from earlier this year. I thought I’d start a new one, I hope that is...
-
kloudie1 replied to the thread Yanmar 1GM10 engine tuning.The only other thing that is a maintenance item is the valve clearance..It should be checked and adjusted if necessary before any other... -
Thermal breaks indicate resistance in the line. The age of a breaker and bad or corrosion on the connector are usual suspects. You have...
