All Activity
-
I believe the braiding is pretty much the same, but I haven't pulled any apart to really know. A single braid line will flatten when... -
BigEasy replied to the thread In what ways are 2002 356 cushion backs attached to boat?.I have Velcro also. When I had the cushions recovered, they no longer had the curved set that the original cushions had, so the...
-
BigEasy reacted to jssailem's post in the thread Is it typical to have electrical connections - with
Like.
I did not like the idea of wire connections in the Mast base, but I wanted to be able to disconnect the wires should I need to remove... -
BigEasy replied to the thread AC power tripping.Don’t overlook the double pole service breaker located just to the inside aspect of the power cord inlet. Should have a clear waterproof...
-
Hayden Watson replied to the thread Lithium Batteries.Here is a good explanation of the fire potential of LFP cells. -
Don S/V ILLusion replied to the thread Stinky hot water.Not sure what that means. For clarity, I’m assuming you vented the tank, not opened a faucet. Mutually exclusive things -
jssailem replied to the thread Furler line selection.This is important. Additionally, I believe the last guide must be at an adequate distance from the drum so that the line can move... -
john6206 replied to the thread Stinky hot water.That’s what I thought, thanks. now I’m troubleshooting the fresh water pump. might have to replace both. -
Another thought.. If the fresh water you are using in the tank is kinda hard, minerals will build up on the heating elements and...
-
Binoculars can help get a very good view of the masthead. Often overlooked. Lying down on deck for stability helps. Lashed low friction...
-
thinwater replied to the thread Furler line selection.Binoculars can help get a very good view of the masthead. Often overlooked. Lying down on deck for stability helps. Lashed low friction... -
There can be only two sources causing the issue. It will be either External or Internal. You state the power cord light is on after the... -
jssailem replied to the thread Furler line selection.Yes, this can be a problem. The issue then has one of two potential solutions. Keep the size line that worked before, but fails now...
-
jssailem replied to the thread AC power tripping.There can be only two sources causing the issue. It will be either External or Internal. You state the power cord light is on after the...
-
shemandr replied to the thread Furler line selection.I'm curious. Why do folks recommend removing the core of a furling line? Wouldn't be better to remove the cover? The core has the...
