All Activity
-
capta replied to the thread Isotherm Icebox Cooling Kit.You might want to find the leak. Refrigerant does not get used up or break down. If and when you do open the system, add a sight glass... -
Ggeorgedubose replied to the thread Possible Transmission Oil Leak at Shift Lever – Kanzaki KM2P.Yes, the position of the shift lever on a KM2P is critical. I had created my own problem of the transmission not going into forward...
-
Thanks Greg. The last wheel pilot I owned was pretty dumb. It had a small computer and used a flux gate compass, that was it. A vast... -
The more I read about the CPT the more I think that may be the best option for us.
-
Ggeorgedubose replied to the thread Possible Transmission Oil Leak at Shift Lever – Kanzaki KM2P.I had a similar oil leak from the Kanzaki KM2P. The oil seal just inside the shift lever was leaking. While I had removed the shift...
-
-
CCalif. Ted replied to the thread Apparent Wind Indicator.When I got my 2002 C320 it had a Davis Windex mounted to the aft masthead and the VHF Ant. had been bent in a dogleg to accommodate the...
-
Jim Legere replied to the thread Lithium Batteries.Most of us have an agreed value marine insurance policy that is based on a current survey (<5 years). A reputable surveyor - the kind... -
Hayden Watson replied to the thread Shimming rudder shaft.The epoxy graphite repair is done from a kit that has been sold by Catalina Direct and is in the West System Epoxy repair manual. The... -
Hayden Watson replied to the thread Shimming rudder shaft.My 88 had brass shims when I got it 28-years ago but over the years, the rudder still developed lateral play due to the shim wearing...
-
-
Ccolemj replied to the thread Shimming rudder shaft.I would be concerned with the galvanic issues of graphite in contact with aluminum or stainless in seawater. Unless this is a...
-
The more I read about the CPT the more I think that may be the best option for us. -
jssailem replied to the thread How to sell my O’day 23?.Welcome @oday240ny to the forum. Congrats on your new to you boat. Exciting times.
-
I just bought an Oday 240 yesterday in New York. I took an ASA101 class and bought it from the instructor. The marina manager is also...
-
Having worked with molten lead on numerous occasions, I would not try to locally melt it to reinert bolts. It stays solid right up to...
-
jssailem replied to the thread Looking for 8mm gypsy for Leroy Somer S801.It is not often that a boat owner desires to reduce the size of his boat's anchoring system. You may be forced to seek your part from...
