All Activity
-
WayneH replied to the thread Outboard steering.We broke a bolt holding the upper gugdeon on the 21 foot trailer sailor we used to own. Pulled the rudder and dropped it on the deck... -
Benny, I went Lithium about 5 years ago and I find it quite frustrating that so many so-called DIY experts and even some actual... -
Im trying to buy a new Duramax Cutlass bearing for my Hunter 49 that is still in the Water, so I cant measure it. I can measure the... -
kappykaplan replied to the thread Yanmar 2gm20f issue.When my mixing elbow clogged, I had lots of unburnt fuel in the exhaust. -
Screen Saver replied to the thread Lithium Batteries.Benny, I went Lithium about 5 years ago and I find it quite frustrating that so many so-called DIY experts and even some actual...
-
Charles13702 replied to the thread Identifying Bearings no-name Catalina 22 trailer.Can't speak to off-brands/clones, but genuine Bearing Buddies only pressurize to 2.5 psi above ambient. It only manages that much, due... -
-
Tally Ho replied to the thread Yanmar 2gm20f issue.Is that (Black stuff in the exhaust) indicative of a mixing elbow issue? I get that, but only when run the RPMs over 3400. I also... -
kappykaplan replied to the thread Yanmar 2gm20f issue.Another item to check is the mixing elbow. Did the exhaust turn black and were you leaving a sheen on the water when the RPMs dropped?
-
Satori reacted to Captain Larry-DH's post in the thread How to attach multiple blocks at one point? with
Like.
It would be helpful to see some photos that aren’t so close in, for those of us who aren‘t familiar with your boat to get a better... -
Don S/V ILLusion replied to the thread Yanmar 2gm20f issue.One (of many) possible causes is a clog in the pick-Up tube screen in the diesel tank. Needs to be checked and cleaned periodically. The... -
jssailem reacted to AP0196's post in the thread Deck restoration/painting. What will it take? with Like.
Thanks for the replies everyone! I will check out the resources!
-
Alan Gomes reacted to capta's post in the thread Route & timing advice: Marina del Rey → Greece on a Downeaster 38 with Like.
Honestly, I can't read all the posts above, so I'm going to just chuck in my two cents worth. MdR through the Canal ( do you have the $... -
DaveJ reacted to Project_Mayhem's post in the thread No priming after filter change on M25XPA with Like.
I forgot to follow up. Thanks @DaveJ holding the key to the start position did the trick! -
jssailem replied to the thread Outboard steering.Looking at the Morgan 28 design plan, an outboard should be able to be secured to the stern of the boat without any interference from...
-
jssailem reacted to capta's post in the thread Route & timing advice: Marina del Rey → Greece on a Downeaster 38 with
Helpful.
Honestly, I can't read all the posts above, so I'm going to just chuck in my two cents worth. MdR through the Canal ( do you have the $...
