All Activity
-
Even the best bikes will have components that will rust near seawater. Add salt content in the air and sand near shore and they will... -
jssailem reacted to Tally Ho's post in the thread Which battery is my bilge pump connected to? with
Wow.
I hope you get it figured out soon Dave! I was working on Tally Ho this morning and glanced across to the neighboring dock and saw... -
That first rock looks like the start of Clear Passage.
-
Time is the issue on this one. Job is demanding.
-
Very wise, and I've actually been considering that as well. At one point I thought my limit would be a 40 to 45. But if I can get my...
-
jssailem reacted to Charles Erwin's post in the thread Replacing injectors follow-up - Racor filter upgrade? with
Helpful.
If always the same result, (no matter injector replacement, filter replacement) maybe look at the only component that can give you... -
jssailem reacted to Scott T-Bird's post in the thread Replacing injectors follow-up - Racor filter upgrade? with Like.
Wow! I was thinking about the lift pump. I had read about the membrane inside it & wondered if this simple mechanism could be the...
-
jssailem replied to the thread Circumnavigating Vancouver Island.Yum... Fresh bread. SO nice. :biggrin:
-
Ward H reacted to Project_Mayhem's post in the thread What to do about this corroded through-hull fitting? with Helpful.
A PVC cap or solo cup fiberglassed in, will provide additional protection without a haul out and can be done in less than two hours... -
Ward H reacted to rgranger's post in the thread What to do about this corroded through-hull fitting? with Helpful.
If you can’t get a haul out… And if you want to save your upcoming trip… And you want to be able to sleep at night with confidence that...
-
Ward H reacted to Project_Mayhem's post in the thread What to do about this corroded through-hull fitting? with Like.
I'd consider fiberglassing a PVC pipe or cap around the valve from the inside so if it does leak, it'll provide a reasonable seal. Use...
-
Ward H reacted to jssailem's post in the thread What to do about this corroded through-hull fitting? with Helpful.
The Bung fitted into the outside would be the only way you could temporarily stop the inflow of water without removing the internal...
-
Ward H reacted to jssailem's post in the thread What to do about this corroded through-hull fitting? with Like.
Based on the image of the hose and the snapped off report, It appears that the valve corrosion is at the near to failure status. It...
-
Ward H reacted to Charles Erwin's post in the thread Replacing injectors follow-up - Racor filter upgrade? with Helpful.
If always the same result, (no matter injector replacement, filter replacement) maybe look at the only component that can give you...
-
Ward H reacted to Scott T-Bird's post in the thread Replacing injectors follow-up - Racor filter upgrade? with Like.
Wow! I was thinking about the lift pump. I had read about the membrane inside it & wondered if this simple mechanism could be the...