All Activity
-
Ddlochner replied to the thread Are you aware of this ABYC Update.Not so fast. AIC ratings vary based on the voltage they are tested at. Class T fuses are rated at 20,000 A @ 120 VDC. Presumably, the...
-
Joe replied to the thread Any thoughts on why this is corroding?.I'm wondering then, why so many sailboats have NOT lost their rigging, since 95% use cotter pins or rings... or those little velcro... -
I do not race the asymmetric and I aim to yank the sail in long before it could compromise the pulpit. The tack is attached to a... -
Captain Larry-DH replied to the thread What to do about this corroded through-hull fitting?.I would not hammer it in. Simply press it in by hand. Those wood plugs expand and will not come out. (On second thought, that... -
Ddlochner replied to the thread Transmission ratio.There isn't much room, however, you might try a "gravestone rubbing" on the model number. There is a faint mark and it looks like a 2 at...
-
Captain Larry-DH reacted to dlochner's post in the thread What to do about this corroded through-hull fitting? with
Helpful.
I'd replace it or remove it and glass over the hole. Both jobs require the boat to be hauled. -
IReviewing the latest electrical information on Panbo, I found this article about the revisions to the ABYC standards regarding Over...
-
I’m pretty sure @Will Gilmore wrote this. -
Tally Ho replied to the thread What to do about this corroded through-hull fitting?.”Did he fire 6 shots or only 5….you have to ask yourself one question….do you feel lucky? We’ll, do ya, punk? Classic :cool: -
Tally Ho replied to the thread Transmission ratio.I also see references to a 3.20:1. And a 2.61:1 gearing. I wonder if you can put more light on the tag or clean it with something to...
-
Tally Ho replied to the thread Transmission ratio.That is my KM2P…. But I found this reference…2.36:1 https://shivglobalmarine.com/detail/yanmar-km3p-1-kanzaki-transmission-2-36-1 But...
-
I’m pretty sure @Will Gilmore wrote this. -
JoeWhite replied to the thread Transmission ratio.It is 2.62 that appears just below the model number -
Tally Ho replied to the thread Transmission ratio.Supposed to be right there…I can make out a faint “2” I think. This is what it should look like… I don’t know what the options were...
-
-
I’m pretty sure @Will Gilmore wrote this.
