All Activity
-
ggrizzard reacted to dlochner's post in the thread What to do about this corroded through-hull fitting? with
Helpful.
I'd replace it or remove it and glass over the hole. Both jobs require the boat to be hauled. -
Peggie Hall HeadMistress replied to the thread Looking for feedback on Raritan's Knock Out Odors (KO2) kit.Unfortunately, no matter what the source, anything that's just added to the bowl and flushed just goes through the toilet discharge... -
ggrizzard reacted to JoeWhite's post in the thread Any thoughts on why this is corroding? with
Like.
Remove the wire and use split rings or cutter pins and wrap with tape or put canvas around it. -
Terry Cox replied to the thread H380 Bent rudder and Smile.Rudder post appears to be bent, according to your picture. A certified marine surveyor can tell you whether it can be repaired and... -
Reviewing the latest electrical information on Panbo, I found this article about the revisions to the ABYC standards regarding Over...
-
BigEasy replied to the thread What to do about this corroded through-hull fitting?.should be less expensive for a diver to do it; takes no more than 30 minutes. -
Don S/V ILLusion replied to the thread What to do about this corroded through-hull fitting?.There is no “somewhat worse” than about to fall apart. The only question is similar to what Clint Eastwood asked in Dirty Harry. “Well... -
kappykaplan replied to the thread What to do about this corroded through-hull fitting?.Boat stays in the slings while you insert the bung. -
fred1diver replied to the thread Electrical panel rebuild.Here are the updates for the panel, almost completed. still need to wire the gas fume detector. I need to replace or check wiring for... -
-
Jim...
-
Don S/V ILLusion replied to the thread H380 Bent rudder and Smile.that sounds too ”cute”. First, no one can reliably tell the extent of a keel issue from a picture. Second, the PO can’t possibly NOT...
-
Don S/V ILLusion reacted to jssailem's post in the thread Are you aware of this ABYC Update with Like.
Reviewing the latest electrical information on Panbo, I found this article about the revisions to the ABYC standards regarding Over...
-
Russ. I like the "Sport-a-Seat" Comfortable, movable, lightweight. https://www.sportaseat.com/ WM sells a cheaper version of this... -
Reviewing the latest electrical information on Panbo, I found this article about the revisions to the ABYC standards regarding Over... -
jssailem replied to the thread Merit 22 owners.Russ. I like the "Sport-a-Seat" Comfortable, movable, lightweight. https://www.sportaseat.com/ WM sells a cheaper version of this...
-
