All Activity
-
smokey73 replied to the thread 40.5 Galley table.Off course you have released the clamp? Once you get it lowered, "exercise it" frequently just like your through hulls. The best way to... -
mermike replied to the thread Surveyor in Connecticut?.Thanks Barry. -
Hello Below replied to the thread Looking for feedback on Raritan's Knock Out Odors (KO2) kit.Totally agree. Depending where our cruising grounds maybe for any particular trip, we will use fresh from the sink in a cup to flush the... -
Tally Ho replied to the thread Advice on installing a GPS Map and new Pedestal Guard.I bought the boat with that mount and chart plotter on it. I made some adjustments to the base plate of the plotter so I can swivel it... -
Tally Ho replied to the thread Electronics….. so many options.If any one calls and offers you a new suite of Ramarine stuff, please let me know! I will take it :cool: Greg
-
capta replied to the thread Electronics….. so many options.If I had the money, I'd go with Furuno, all through. That's what most commercial fishing and workboats use. If you check out used... -
We miss you too! :beer: -
Rich Stidger replied to the thread 40.5 Galley table.Yes. The counter-weight inside of the mast compression tube gets stuck. It probably gets rusty and sticks to the inside of the tube. I... -
Davidasailor26 replied to the thread House batteries not charging when engine running.The alternator isn’t in the picture, so it’s a little hard to tell what’s actually charging the batteries when the engine is running... -
Tally Ho replied to the thread Hunter 37.5 switch to propane.Ah, got it. Didn't think about CNG. Makes sense, but still hard to believe Hunter didn’t consider a propane locker. But if not, then...
-
Ralph Johnstone replied to the thread H380 Bent rudder and Smile.That's not much of a smile, more of a crack from a good grounding. Be sure to count your fingers after shaking hands with the broker... -
Ralph Johnstone reacted to Don S/V ILLusion's post in the thread H380 Bent rudder and Smile with
Like.
Bahamas + bent rudder shaft + keel separation = grounding. Should be evidence on bottom or leading edge of keel if true. -
Tally Ho replied to the thread Advice on installing a GPS Map and new Pedestal Guard.I have my GPSMap740 mounted on a arm that extends away from the guard… The wires run down through the pedestal legs. But you may be...
-
-
Tally Ho replied to the thread Electronics….. so many options.I mounted the charging cradle for my H50 remote mic in the cockpit and ran power to it….so when using it, it is close at hand AND it is...
-
-
JamesG161 reacted to jssailem's post in the thread We are expecting a Heat wave.. A Tropical heat wave.... with Like.
Weather update. Rufus look at Friday. Friday August 15 The next couple of days will present a Touch of Fall. Storm time. An...
