All Activity
-
jssailem reacted to Tally Ho's post in the thread Removing Raymarine ST4000+ from Edson Destroyer Wheel — Need Guidance with
Like.
Clean up the parts of the AP and get a new belt, and you should be good. Inspection for cracks at the stud holes ( someone posted a fix... -
Tally Ho replied to the thread Removing Raymarine ST4000+ from Edson Destroyer Wheel — Need Guidance.Clean up the parts of the AP and get a new belt, and you should be good. Inspection for cracks at the stud holes ( someone posted a fix... -
Ddlochner replied to the thread Removing Raymarine ST4000+ from Edson Destroyer Wheel — Need Guidance.Edson sells them or you can get one at Defender. https://defender.com/en_us/catalogsearch/result/?q=Edson%20wheel%20nut
-
shemandr replied to the thread 1977 Chrysler 22 - Mice Habitat?.Ooph! We had the white footed mice in one of our homes on Eastern LI. At that time there was a well publicized death from Hantavirus... -
DaveJ replied to the thread Removing Raymarine ST4000+ from Edson Destroyer Wheel — Need Guidance.Same as above, and if you want, after a day of pressure by the puller, give the hub of the wheel a tap with a brass hammer. cheers -
DaveJ reacted to dlochner's post in the thread Removing Raymarine ST4000+ from Edson Destroyer Wheel — Need Guidance with Like.
The end of the shaft is threaded, the threads are visible in the extreme close up photo you provided. A large gear puller, time, and PB...
-
jssailem reacted to Tally Ho's post in the thread RIP my Canadian friend (almost)…saved by a MOB move! with Like.
I was careful as I thought about my retrieval plan…no jibes…not in the wind and waves I was in. Tacks back and forth, let the jib...
-
Don S/V ILLusion replied to the thread 1977 Chrysler 22 - Mice Habitat?.Read up on hantavirus and decide for yourself. -
I was given a problematic printer for free a few months ago. Three hours later it was up and running. So far I've printed stanchion... -
Tally Ho replied to the thread RIP my Canadian friend (almost)…saved by a MOB move!.I was careful as I thought about my retrieval plan…no jibes…not in the wind and waves I was in. Tacks back and forth, let the jib...
-
We have about 100 kids in the Jr. sailing program at our club each year. Makes it a busy place!
-
jssailem reacted to shemandr's post in the thread RIP my Canadian friend (almost)…saved by a MOB move! with Like.
The Canadian hat is a good looking hat! Worth retrieving. But turns in roughish water have some risk. So far as I can remember, I...
-
All correct ! Lithium wired in parallel must all have the same state of charge before wiring them together... Ideally cycled once or...
-
shemandr replied to the thread RIP my Canadian friend (almost)…saved by a MOB move!.The Canadian hat is a good looking hat! Worth retrieving. But turns in roughish water have some risk. So far as I can remember, I...
-
An update on my new LFP battery bank… I had communicated with the mfg (Humsienk) and they asked me to independently charge each battery...
