All Activity
-
Ddlochner reacted to capta's post in the thread Need Help: Prop Shaft Jam Nut Won’t Budge with
Helpful.
Silicon bronze, NOT brass. If someone has been using brass instead of the more expensive silicon bronze, on a boat I was looking at, my... -
kappykaplan replied to the thread rotten deck under the helm.I had an issue several years ago where my helm pedestal was pulling out of the deck. Turned out the cockpit sole had rotted. We cut... -
capta replied to the thread Need Help: Prop Shaft Jam Nut Won’t Budge.Silicon bronze, NOT brass. If someone has been using brass instead of the more expensive silicon bronze, on a boat I was looking at, my... -
kappykaplan replied to the thread Need Help: Prop Shaft Jam Nut Won’t Budge.Depends on what you get, I reckon! :beer:
-
smokey73 replied to the thread Heartwarming scene today!.Our club has a very active youth sailing program and we host several regattas each year. They also run a youth sailing camp each year... -
Ward H reacted to Tally Ho's post in the thread Need Help: Prop Shaft Jam Nut Won’t Budge with
Like.
Leave it be until you HAVE to take the prop off. I used to have mine on backwards….’cause I didn’t know any better. Never had a... -
Ward H reacted to jssailem's post in the thread Need Help: Prop Shaft Jam Nut Won’t Budge with Like.
I am not sure that they are Incorrect. I understand that the larger nut is the primary one. It is tightened to the torque spec, which...
-
You have a rigger? Isn't that what they do? -
jssailem replied to the thread rotten deck under the helm.Big project. I have not experienced such on any boat. This maybe the luck of the draw. Andy over at BoatworksToday.com has removed...
-
About 4 months ago, I couldn't bust loose a spindle nut on a mower deck I had to repair. All the online instructions said the nut could...
-
jssailem replied to the thread Hunter 42 Passage Grounding wires in center bilge..I was having no luck searching the SBO manuals for an electrical diagram of the Hunter 42 Passage Bonding system. Here is a ChatGBT...
-
-
Ward H reacted to dmax's post in the thread Removing Raymarine ST4000+ from Edson Destroyer Wheel — Need Guidance with Like.
You might also try applying some heat - the expansion often breaks the corrosion bonds.
-
jssailem replied to the thread Teak upkeep.Calm mornings before 10AM on dry days are best. Waiting till the sun is at it’s peak will have the varnish solvents flashing off before...
-
jssailem reacted to dmax's post in the thread Removing Raymarine ST4000+ from Edson Destroyer Wheel — Need Guidance with Helpful.
You might also try applying some heat - the expansion often breaks the corrosion bonds.
-
jssailem replied to the thread Heartwarming scene today!.The opportunities to participate in boating an experience are associated with availability and presence of water in the location. Folks...
