All Activity
-
Hayden Watson replied to the thread 3d printing for boats..Well, I finished my first "real" 3d printing project and am happy with the results. Last year I installed a 250A alternator in Papillon... -
-
Ralph Johnstone replied to the thread Removing Raymarine ST4000+ from Edson Destroyer Wheel — Need Guidance.I completely removed my ST4000 drive and replaced all of the belt bearings and bearing pins. Fun job during the winter in a heated... -
-
JoeWhite replied to the thread Removing Raymarine ST4000+ from Edson Destroyer Wheel — Need Guidance.As it is mentioned above. I used steering wheel puller with longer than normal arms, it is available from any auto parts store. Spray... -
Th earthquake was revised upward to 8.8 from 8.1! -
Tally Ho replied to the thread Removing Raymarine ST4000+ from Edson Destroyer Wheel — Need Guidance.It looks like the wheel shaft nut is missing already, so the wheel should just slide off the shaft. As Don said, it can take some... -
Challenges Power. Water makers require pumps to push seawater at high pressure through membrane filters that extract the salts and... -
jssailem replied to the thread Need Help: Prop Shaft Jam Nut Won’t Budge.The prop may not come off easily once you get the nuts free. Puller makes it easier. -
Tally Ho replied to the thread Need Help: Prop Shaft Jam Nut Won’t Budge.I think Don is thinking you are pulling the prop off….hence the gear puller. I would try 2 pipe wrenches if you can get one on the thin...
-
jssailem replied to the thread Water maker in the Salish?.Challenges Power. Water makers require pumps to push seawater at high pressure through membrane filters that extract the salts and...
-
Tally Ho replied to the thread ODay 40 Battery Wiring.I have an O’Day 322 (1988). I have had several battery configurations over the past 10 years: 1) 2 12-volt batteries, each wired to...
-
-
Yeah, that is my intuition, but I still don't have a good feel for how the boat will respond. So, I am reluctant to commit strongly to...
-
DinghySailor replied to the thread Water maker in the Salish?.We don’t go to marinas if we can help it. We’ve managed over the years coming to BC to keep our tanks mostly full by filling our jerrys...
-
jssailem replied to the thread 1986 Hunter 23 mainsheet.There is a rule of thumb. Line length = (Boom length × Purchase ratio) + tail (~6 feet) It depends on several factors. What type of...
-
jssailem replied to the thread 1986 Hunter 23 mainsheet.@quiggers no That data is not part of their database.
-
jssailem replied to the thread Tsunami Watch.:beer:
