All Activity
-
kloudie1 replied to the thread Universal M-18 fuel return line part identification.Another option is to find exactly where the leak is, remove the "leak-off" manifold and take it to a machine shop that can silver solder... -
CCrazy Dave Condon replied to the thread H260 from 2001 the "T-ball" connector pulled away from wires of jib, up top, what replacement connector is used now, and any chance for self fix??.There are many rigging shops across the US but you will still know the information to do forestay unless you send in the old forestay...
-
FastOlson reacted to Joe's post in the thread Low-Stretch Halyards actually worth it for cruising? with
Helpful.
Why were so many boats rigged with wire to rope halyards back in the day? Primarily to save space without sacrificing strength and... -
FastOlson replied to the thread Low-Stretch Halyards actually worth it for cruising?.There will be some change in the 'righting' moment too when you upgrade from the OEM wire halyards. Certainly nothing very large, but...
-
kloudie1 replied to the thread Trouble in the Aft Compartment – Cherubini 30 Access + Rudder Stuffing Work.No help, but a comment: The hose does not look that bad in the picture.. I see an old label from when it was replaced a while back ...
-
Hello Below replied to the thread Weather forecast for the PNW.John, by “transient boaters” do you mean boat’s stopping by just for water only or would that also include boats that are marina guests? -
shemandr reacted to Joe's post in the thread Low-Stretch Halyards actually worth it for cruising? with
Like.
Why were so many boats rigged with wire to rope halyards back in the day? Primarily to save space without sacrificing strength and... -
Joe replied to the thread Low-Stretch Halyards actually worth it for cruising?.Why were so many boats rigged with wire to rope halyards back in the day? Primarily to save space without sacrificing strength and... -
Tally Ho reacted to Leeward Rail's post in the thread Strange grumbling noise behind engine with Like.
Does it make the noise in neutral at the dock ? (Shaft won't spin from water passing it at the dock and you can safely diagnose it... -
BigEasy reacted to marcham's post in the thread Refitting Hunter 40-1, need some advice... with Like.
I've seen a lot worst. I bet a stainless brush will take 95% of the scum and light surface corrosion away. If there's no smile when... -
twodzusfittings replied to the thread Universal M-18 fuel return line part identification.Where in the metal line, is the leak? Is it at the fitting or at what point in the line. In other words, is there enough metal hose to... -
Just to follow up on this. It's been a month and I can't seem to reproduce the problem. I hate problems that fix themselves. -
After a day kayaking the Marble River we left Varney Bay , out through Quatsino Narrows and decided to try Atkins Cove. Kayaking...
-
jssailem reacted to Crazy Dave Condon's post in the thread H260 from 2001 the "T-ball" connector pulled away from wires of jib, up top, what replacement connector is used now, and any chance for self fix?? with Helpful.
@Davenport I believe your boat was commissioned by me due to seat attached to the rear fuel locker lid for a retired physician...
-
Thanks Dave, I did charge them independently before I took them out to the boat. But I will try that again. I don't know if they...