All Activity
-
Hello Below replied to the thread 3YM30 rebuild raw water pump.Other than the annoying background music this basic one may be of interest. Yanmar 3ym30 raw water pump renewal A more in depth YouTube... -
My friend's Island Packet 31 has just such a feature. The cockpit floor is a water tight hatch... it has a couple of pistons, lifts... -
I have rebuilt this raw water pump before but it has been many years since doing it and have all kinds of info and photo’s but the one... -
FastOlson reacted to Stu Jackson's post in the thread Removing pin from old deck block? with
Helpful.
Call Garhuaer with your plate and hole dimensions They'll make up new assemblies for you. Those are rivets, not pins. This question... -
Joe replied to the thread Deck Plate in Cockpit Floor.My friend's Island Packet 31 has just such a feature. The cockpit floor is a water tight hatch... it has a couple of pistons, lifts... -
Joe replied to the thread Instrument Shuffle.Am I upsetting your plan if I suggest to simply mount the instrument panel on the lazzerette bulkhead near the wheel. You could even...
-
Joe replied to the thread Backstay for 1987 Catalina 22.Your backstay is a single wire set up for an adjustable mechanism. The short wire clamped to the long backstay (not the one running...
-
Davidasailor26 reacted to kappykaplan's post in the thread 2001 Hunter 340 main bilge and leak questions with
Like.
Try bed-it butyl -
I would push my O'Day 25 as often as I could. I love heeling. The O'Day's rigging is on the lighter side and only has a shoal keel. It...
-
AaronD replied to the thread Backstay for 1987 Catalina 22.Does your boat have stay anchors (eye bolts) on both sides of the transom? Some were originally shipped with a single anchor (on one... -
Davidasailor26 replied to the thread Instrument Shuffle.Any NMEA 2000 plotter and many instruments should be able to show that data once it’s on the network. But it does require updating the...
-
BigEasy replied to the thread 2008 Oceanis 40 - Marine head water intake fitting size (diameter) and strainer type.The intake thru hull fittings on my boat are 3/4”. The galley & head discharge fittings are 1 1/4”. If you are not using “real”... -
Ddlochner replied to the thread Last night, greatest experience.Times have changed. Long gone are the triangular courses, Windward-Leeward courses dominate. The thinking behind the change was that the...
-
Hayden Watson replied to the thread Alternator Temperature Sensors.It would not have mattered if you had the original 40hp engines and they were running at 100% of their max power when at wide open... -
-
Tally Ho reacted to Rich 35.5's post in the thread (another) Fuel/Water Separator Thread - Help me choose! with Like.
Only about a year. So far no problems.
