Does anyone know where I can find out how/where to run wires in my 2004 Hunter 44DS? Is that information that Hunter would provide by model? We will be installing some new electronics and would like information before we start taking the boat apart. Thank you, Joanne
Wiring
- Thread starter Jgood1223
- Start date
- Status
Owner's Manual
If you have a copy of the original owner's manual, you can look to see the wire chase location layout. These are PVC or flexible tubes that Hunter uses to run many of the wiring from point to point. The factory usually leaves messenger cords so that you can pull new wires. You can also contact Hunter directly for assistance.
If you have a copy of the original owner's manual, you can look to see the wire chase location layout. These are PVC or flexible tubes that Hunter uses to run many of the wiring from point to point. The factory usually leaves messenger cords so that you can pull new wires. You can also contact Hunter directly for assistance.
Thank you
Thank you, I do have the owners manual, I'll take a look. We're running a cable from the base of the mast to the helm for radar. Joanne
Thank you, I do have the owners manual, I'll take a look. We're running a cable from the base of the mast to the helm for radar. Joanne
- Status