Which prop for 1980 H33

S

sbarefoo

.
Dec 21, 2012
4
Hunter 33 Cape Coral
I need to replace the three blade prop on my 1980 H33 that works just fine but is showing some wear and tear. I'm thinking that I should look for the following specs:
13x11
1 inch shaft
Right hand

I've seen some remanufactured props online that have those specs but they're listed as being manufactured by Chris Craft for inboards. The picture looks like my current prop, but since I don't know what I don't know I was hoping that someone could let me know if there are other things to look for other than diameter, pitch and shaft size.

Thanks for any info,

Steve
 
A

ALNims

.
Jul 31, 2014
208
Hunter 356 Huis Ten Bosch Marina, Sasebo, Japan
sbarefoo said:
I need to replace the three blade prop on my 1980 H33 that works just fine but is showing some wear and tear. I'm thinking that I should look for the following specs:
13x11
1 inch shaft
Right hand

I've seen some remanufactured props online that have those specs but they're listed as being manufactured by Chris Craft for inboards. The picture looks like my current prop, but since I don't know what I don't know I was hoping that someone could let me know if there are other things to look for other than diameter, pitch and shaft size.

Thanks for any info,

Steve
Click to expand
Send the engine model and gear box information along with diameter size to the engine manufacturer. They can tell you the right prop size.
 
You must log in or register to reply here.
Top Bottom