Wheel deign for a dingy needed

[njlarry]

Wondering what solutions anyone may have come up with moving an inflatable dingy around on the hard. The fold down wheel option looks like a good idea but I don't relish drilling holes in the transom. Any ingenious DIY ideas out there?
Below is a link to a kayak carrier by LL Bean that I am considering.

https://www.llbean.com/llb/search/?...nce&thumbType=0&gnattr=-1&nav=pg2-sr&start=49
Sorry for the typo in the heading, that's design of course.

Free beer for the winning entry, local pickup only.

 

[BlowMeAway]

Two skateboards and one wrap around ratchet style tie down strap. You choose the mid point.

 

[Sailm8]

I use these on mine: http://www.defender.com/product3.jsp?path=-1|215570|294|2345882&id=42432

 

[LeslieTroyer]

I did fold down wheels. Holes are above the water line but used butyl also

 

[Ken Cross]

My brother built a dolly that he attached with one strap wrapped around the boat. He used 4 cheap lawn mower style wheels which worked for his needs. The downside, you need to put the dolly somewhere when using the boat. It was made on a simple lightweight wooden frame.

Ken

 

[BlowMeAway]

Lots of DIY ideas here:

https://www.google.com/search?q=din...AUICCgC&biw=1024&bih=704#imgrc=PfO6vcEvokPlIM:

 

[Gene Neill]

An ordinary hand truck. Strap it to the dink if needed.