whats the big poop - TEAK...

  • Thread starter Sean Herron...herrons@telus .net.
  • Start date
Status
Not open for further replies.
S

Sean Herron...herrons@telus .net.

Hello, I just finished up sanding down and scraping my toerails, (round bottomed orbital with a large thin steel spatula pressed up to the rail) which are teak, and were varnished (yellow, blistered, blanched and ugly), and finisihed off by oiling them with strips of teak oil soaked cheesecloth that I laid over them in what sun was left, while I had a beer... Oh, Cripes, how many people were after me for having done 'the wrong, you know I would not do it that way and if I were you', badgering... Looks fine to me, I just rub them up on a dry day and they go back to snuffs... No freezing temperatures here so no frost splits... So I am asking you then, what would you have done, and expecting a manic string, but manic strings are fun... In the long run, or the short run, I am walking distance from my slip, an oily rag once and awhile, like a quick sweep just seems less maintenance in the end... And is teak not all gummed up with it own inherent oils and silica... Laptops and beer and batteries... Thanks in advance... SH.
 
D

Dave

Oh - I'm so sorry

You are going to be so sorry you will soon be writing back to apologize to this forum for what you have done. I assume you really enjoy maintaining teak because now you are on a path to perpetual enjoyment. dave
 
S

Sean Herron...herrons@telus .net.

Bah...Smartass Utopia...

Heh Ho, I just can't stand it now... Fun, fun, a joke really... SH.
 
S

Sean Herron...herrons@telus .net.

Dave who you shite...

Hello, I think I know your butt, and so sorrow you screwed up on your your kids Xmas Lego... I know all the arguements, but I just want to hear the 'post modern'... If not an obvious target, then sorry 'Dave' and thanks for your help... Sh.
 
T

Tom Ehmke

Haven't cracked your code,but...

I hope you enjoy your teak treatment. Varnish, Cetol, Teak oiling. So many threads, so many opinions. They all work for someone, and none of them harm the teak. I guess that is the bottom line unless you are just trying to stir things up to end the year. It has been kind of slow around here for a couple of weeks.
 
P

proto57

What I did and what happened...

I sanded, cleaned, bleached and oiled all the teak last spring... and it looked wonderful: Rich, golden new teak brown. Especially considering what it DID look like before, which was dark grey with green mold all over it. And during the summer, I kept an old cotton sock and a can of teak oil on the boat, and it only needed a quick rub down three or four times at the slip. No biggie. Looked great. BUT: It only took about two months in the driveway for it to look like it had sat neglected for another twenty-five years... it's dark grey again! So of course the answer seems to be the one hinted at by another post here... the teak-oil route works great, but you must continually apply the stuff year 'round. Looks like at least once a month would do it. Sure beats sanding and varnishing each spring, though... and I built, then owned, a 20' wooden cruising yawl for over ten years, so I can vouch for the hell in that combo. Rich.
 
Status
Not open for further replies.