Vision 32 holding tank

[schowy]

I spent last weekend tearing out the old alluminum holding tank that came in my Hunter Vision 32. The tank was located below the walkthrough transom and had to be cut apart to get it through the small opening, obviously the tank was installed before the deck was placed over the hull. I was hoping someone else has done this before as I was thinking the only option I have is to install a flexible bladder system, however can not find any that would fit this area and give us some more capacity. Any advice out there, I am open to any and all suggestions. Thanks!

 

[Rick D]

I put in two six-gallon tanks siamesed by joining with a piece of 1 1/2 hose. At least I think they were six gallon. See the Ronco site for options. Good luck! It did work for me.

 

[schowy]

Thanks Rick, I have been reading pages of posts to see if anyone else had this issue. I prefer to keep it where it is so happy to hear that is a viable option! I'll let you know how it goes.