Universal M-18 Sherwood Pump Impeller

[Bob]

Geez, and I never thought it would happen to me!!!

My impellor on my M-18 Sherwood pump was literally 50% gone!!!!! Age, dry rot, not using my boat (Lake Lanier, Georgia) or starting up my diesel occasionally were the culprit.

I did not find a serial number on the pump, only "sherwood" on the coverplate. Does anyone happen to know the kit number for this unit. I did not take off the impellor for proper measurement, which in hindsight was not good.

Thank you
Bob
1988 Mark II
M-18 Universal Diesel

 

[Glenn]

Sherwood pump

There are two Sherwood pumps used on these engines. One is the "new" Sherwood. It has bolts accessible on the engine side of the pump. I recall it is the K9000 series Sherwood impeller. Easiest to remove the pump to replace the impeller. I'm not sure about the other pump.

 

[Stu Jackson]

go to www.marinedieseldirect.com

and look up your engine and pump #

 

[Bob]

Thanks Stu

Thanks Stu,

New impeller kit ordered and on its way (Torrensen).

Appreciate the feedback.

Bob
Cat. 30