Transmission Dipstick Source, 3GM30

[Steverhnm]

I need to replace my transmission dipstick on my 3GM30. Its yellow, the one where the cap breaks off when it gets old if you tighten it too much. Problem is I live in Albuquerque, my boat is in Mexico, and I don't really have a decent source for Yanmar parts established.

Can anyone provide a PN and a stocking source for this part. Your help is greatly appreciated.

 

[quadrille38]

Torresen marine at torresen.com has been a very good source of Yanmar parts.

Just saw they have changed hands and have a new web link at http://shop.toadmarinesupply.com/marine_diesel_direct/Yanmar

Looks to be the same parts offering

 

[Calif. Ted]

I get parts from Boatswains Locker, call to see if they can ship to you where needed, they say they cover the Southwestern US.
http://boatswainslocker.com/content.aspx?file=customerpages/about.htm

 

[Steve Dion]

You cannot purchase Yanmar parts from a dealer/distributor outside of your territory,

 

[kloudie1]

Looks like Boatswain's Locker covers Mexico and New Mexico..
http://us.yanmar.com/where-to-buy/
You'll need the model and serial of the transmission itself to get the correct part. That info is listed on a p;ate attached to the side of the transmission case.

 

[Steverhnm]

So I don't have access to my boat, and that is one picture I don't seem to have. Is there anyone out there that might be able to help with a PN?

I can't get the transmission part number to get the correct dipstick, is there anyone out there with a 1990 35.5 that might be able to provide a transmission part number. I believe its a Hurth.

 

[Calif. Ted]

Part #177088-02451 For KM2P(-1) & KM3P transmissions, It is possible the part number is 177088-02450 if the transmission is KM3A
These are the part numbers per TOA, can't help identifying which model you have.