Throttle lever / cable replacement for a 1999 Hunter 410

[2discover]

Hi
Shifting the throttle lever on my H410 is stiff, the lever shows some wear and corrosion and I consider to replace the lever and both cables. Can anyone help me with the manufacturers and the spare part numbers? Since the boat is some thousand miles away from my home, can anyone share experiences on how the cables are installed and how easy or hard they are to exchange? Are the cables easily accessible?
Any recomendations hints and shared experiences are welcome!
Marco

 

[2discover]

The replacement is done. It was a relatively easy project. If you are interested in, have a look at my blog (you need to scroll down a little bit), where you can see some pictures as well.

http://sv-tranquilizer.blogspot.ch/p/the-projects.html

 

[Steve Dion]

Marco:

I replaced my MV-2 also. It was a medium difficulty project and I had some help. They have the new cables & shifter at the Hunter Owners Store, so that is a good place to start.

The worst part on my Hunter Vision was working inside the console. We also had some minor difficulty getting the cables routed, but every model is different and you may run into different challenges.

The new setup works very smooth.

 

[charliegrau]

I replaced my old shifter and cables this year with the same parts you and Steve used from SBO. Works great...shifts "like butter".